Thermal-magnetic (TM-line)
TM12-MSM
https://www.schurter.com /PG20
Circuit Breaker for Equipment thermal-magnetically with Metal Actuator
See below:
Approvals and Compliances
Description
Applications
- Power supplies
- TMF12-211 - Thermal-magnetic circuit breaker ,
- Metal switch non-illuminated and illuminated
- 1-pole
- Uninterruptible power supply
- Power tools
- Household appliances
- Quick connect terminals 6.3 x 0.8 mm / screw terminals
References
Component 1: circuit breakers
Component 2: metal switch
Component 3: Coupler
Weblinks
pdf data sheet, html datasheet, General Product Information, Distributor-
Stock-Check, Detailed request for product, Product News
Technical Data
Rated Voltage AC
Rated Voltage DC
AC 240 V: 50/60
28 V
Overload
IEC: min. 40trips
@ 6 x Ir, cos φ 0.6
UL / CSA: min. 50trips
@ 1.5 x Ir, cos φ 0.75
-5°C to 60°C
0.75 mm @ 5 - 60 Hz
acc. to IEC 60068-2-6, test Fc
7 G @ 60 - 500 Hz
acc. to IEC 60068-2-6, test Fc
60 G / 18ms
acc. to IEC 60068-2-27, test Ea
Thermal-Magnetic
Manual ON/OFF
Rated current range AC
Conditional short circuit capa- IEC 60934: PC1, AC 240 V: 1 kA
city Inc
0.05 - 15 A
Allowable Operation Temp.
Vibration Resistance
Dielectric Strength
50Hz: > 1.5kV
Impulse 1.2/50 μs: > 2.5kV
500VDC > 100 MΩ
2 x Ir: 5000switching cycles
Reset type
AC : 2 x Ir , cos φ 0.6 :
DC : 2 x Ir , L/R = 2 - 3 ms :
50switching cycles
Insulation Resistance
Endurance typical
Shock Resistance
Tripping Type
Actuation Type
Shock Protection
Tightening Torque Stainless
Steel Nut
IK07
Manual ON/OFF type
AC : 2 x Ir , cos φ 0.6 :
12 Nm for thread M19, 16 Nm for M22
DC : 2 x Ir , L/R = 2 - 3 ms :
5000switching cycles
Salt Spray Test (acc. to DIN
50021-SS)
24 h / 48 h / 96 h Residence Time
Supply Voltage
24 VDC Ring Illumination without series
resistor Point Illumination
ca. 55g
Weight
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-
ments by SCHURTER.
1
Circuit Breakers