TLV5604IPWR

更新时间： 2024-02-10 19:18:37

品牌	Logo	应用领域
德州仪器 - TI		转换器数模转换器光电二极管
页数	文件大小	规格书
27页	360K
描述
2.7-V TO 5.5-V 10-BIT 3-mS QUADRUPLE DIGITAL-TO-ANALOG CONVERTERS WITH POWER DOWN

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

TLV5604IPWR 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	零件包装代码：	TSSOP
包装说明：	GREEN, PLASTIC, TSSOP-16	针数：	16
Reach Compliance Code：	compliant	Factory Lead Time：	6 weeks
风险等级：	5.14	Is Samacsys：	N
最大模拟输出电压：	5.1 V	最小模拟输出电压：
转换器类型：	D/A CONVERTER	输入位码：	BINARY
输入格式：	SERIAL	JESD-30 代码：	R-PDSO-G16
JESD-609代码：	e4	长度：	5 mm
最大线性误差 (EL)：	0.0977%	湿度敏感等级：	1
位数：	10	功能数量：	1
端子数量：	16	最高工作温度：	85 °C
最低工作温度：	-40 °C	封装主体材料：	PLASTIC/EPOXY
封装代码：	TSSOP	封装等效代码：	TSSOP16,.25
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
峰值回流温度（摄氏度）：	260	电源：	3/5 V
认证状态：	Not Qualified	采样速率：	0.102 MHz
座面最大高度：	1.2 mm	最大稳定时间：	18 µs
标称安定时间 (tstl)：	3 µs	子类别：	Other Converters
最大压摆率：	5.5 mA	标称供电电压：	3 V
表面贴装：	YES	技术：	CMOS
温度等级：	INDUSTRIAL	端子面层：	Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式：	GULL WING	端子节距：	0.65 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	NOT SPECIFIED
宽度：	4.4 mm	Base Number Matches：	1

TLV5604IPWR 数据手册

TLV5604

2.7-V TO 5.5-V 10-BIT 3-µS QUADRUPLE DIGITAL-TO-ANALOG CONVERTERS

WITH POWER DOWN

SLAS176A – DECEMBER 1997 – REVISED SEPTEMBER 1998

Four 10-Bit D/A Converters

Hardware Power Down (10 nA)

Software Power Down (10 nA)

Simultaneous Update

Programmable Settling Time

of 3 µs or 9 µs Typ

TMS320, (Q)SPI, and Microwire Compatible

Serial Interface

applications

Internal Power-On Reset

Battery Powered Test Instruments

Digital Offset and Gain Adjustment

Industrial Process Controls

Low Power Consumption:

5.5 mW, Slow Mode – 5-V Supply

3.3 mW, Slow Mode – 3-V Supply

Machine and Motion Control Devices

Communications

Reference Input Buffers

Voltage Output Range . . . 2× the Reference

Input Voltage

Arbitrary Waveform Generation

Monotonic Over Temperature

D OR PW PACKAGE

(TOP VIEW)

Dual 2.7-V to 5.5-V Supply (Separate Digital

and Analog Supplies)

REFINAB

OUTA

OUTB

OUTC

OUTD

REFINCD

AGND

description

LDAC

DIN

SCLK

The TLV5604 is a quadruple 10-bit voltage output

digital-to-analog converter (DAC) with a flexible

4-wire serial interface. The 4-wire serial interface

allows glueless interface to TMS320, SPI, QSPI,

and Microwire serial ports. The TLV5604 is

programmed with a 16-bit serial word comprised

ofaDACaddress, individualDACcontrolbits, and

a 10-bit DAC value.

DGND

The device has provision for two supplies: one digital supply for the serial interface (via pins DV and DGND),

and one for the DACs, reference buffers and output buffers (via pins AV

and AGND). Each supply is

independent of the other, and can be any value between 2.7 V and 5.5 V. The dual supplies allow a typical

application where the DAC will be controlled via a microprocessor operating on a 3-V supply (also used on pins

and DGND), with the DACs operating on a 5-V supply. Of course, the digital and analog supplies can be

tied together.

The resistor string output voltage is buffered by a x2 gain rail-to-rail output buffer. The buffer features a Class AB

output stage to improve stability and reduce settling time. A rail-to-rail output stage and a power-down mode

makes it ideal for single voltage, battery based applications. The settling time of the DAC is programmable to

allow the designer to optimize speed versus power dissipation. The settling time is chosen by the control bits

within the 16-bit serial input string. A high-impedance buffer is integrated on the REFINAB and REFINCD

terminals to reduce the need for a low source impedance drive to the terminal. REFINAB and REFINCD allow

DACs A and B to have a different reference voltage then DACs C and D.

The device, implemented with a CMOS process, is available in 16-terminal SOIC and TSSOP packages. The

TLV5604C is characterized for operation from 0°C to 70°C. The TLV5604I is characterized for operation from

–40°C to 85°C.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

12 3 4 5 6 7...27

下载PDF

与TLV5604IPWR相关器件

型号	品牌	描述	获取价格	数据表
TLV5604IPWRG4	TI	2.7-V TO 5.5-V 10-BIT 3-Î¼S QUADRUPLE DIGITAL	获取价格
TLV5604PW	TI	2.7-V TO 5.5-V 10-BIT 3-mS QUADRUPLE DIGITAL-TO-ANALOG CONVERTERS WITH POWER DOWN	获取价格
TLV5606	TI	2.7 V TO 5.5 V LOW POWER 10-BIT DIGITAL-TO-ANALOG CONVERTERS WITH POWER DOWN	获取价格
TLV5606CD	TI	2.7 V TO 5.5 V LOW POWER 10-BIT DIGITAL-TO-ANALOG CONVERTERS WITH POWER DOWN	获取价格
TLV5606CDG4	TI	10-Bit, 3 or 9 us DAC, Serial Input, Pgrmable Settling Time/Pwr Consumption, Ultra Low Pow	获取价格
TLV5606CDGK	TI	2.7 V TO 5.5 V LOW POWER 10-BIT DIGITAL-TO-ANALOG CONVERTERS WITH POWER DOWN	获取价格

与TLV5604IPWR相关文章

资料手册解读：UC3842参数和管脚说明
2024-05-22

5
一文带你了解无源晶振的负载电容为何要加两颗谐振电容CL1和CL2
2024-05-22

4
玻璃管保险丝与陶瓷管保险丝：区别与替代性探讨
2024-05-22

3
PCF8574资料解读：主要参数分析、引脚说明
2024-05-21

17

产品中心

服务支持

精选活动

关于我们

帮助中心

TLV5604IPWR

TLV5604IPWR 技术参数

TLV5604IPWR 数据手册

与TLV5604IPWR相关器件

与TLV5604IPWR相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

TLV5604IPWR

TLV5604IPWR 技术参数

TLV5604IPWR 数据手册

与TLV5604IPWR相关器件

与TLV5604IPWR相关文章

您还可以找

您在本页遇到什么问题？