TLP3320
5. Internal Circuit
6. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 )
Characteristics
Symbol
Note
Rating
Unit
LED
Input forward current
IF
∆IF/∆Ta
VR
50
-0.5
mA
mA/
V
Input forward current derating
Input reverse voltage
(Ta ≥ 25 )
(Ta ≥ 25 )
5
Input power dissipation
Input power dissipation derating
Junction temperature
PD
50
mW
mW/
∆PD/∆Ta
Tj
-0.5
125
Detector OFF-state output terminal voltage
ON-state current
VOFF
ION
100
V
100
mA
ON-state current derating
ON-state current (pulsed)
Output power dissipation
Output power dissipation derating
Junction temperature
(Ta ≥ 25 )
∆ION/∆Ta
IONP
PO
-1.0
mA/
mA
(t = 100 ms, Duty = 1/10)
300
96
mW
mW/
(Ta ≥ 25 )
∆PO/∆Ta
Tj
-0.96
125
Common Storage temperature
Operating temperature
Tstg
-40 to 125
-40 to 85
260
Topr
Lead soldering temperature
Isolation voltage
(10 s)
Tsol
AC, 60 s, R.H. ≤ 60 %
BVS
(Note 1)
1000
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: This device is considered as a two-terminal device: Pins 1 and 2 are shorted together, and pins 3 and 4 are
shorted together.
Caution:This device is sensitive to electrostatic discharge (ESD). Extreme ESD conditions should be guarded against
by using proper antistatic precautions for the worktable, operator, solder iron, soldering equipment and so on.
7. Recommended Operating Conditions (Note)
Characteristics
Symbol
Note
Min
Typ.
Max
Unit
Supply voltage
VDD
IF
5
7.5
80
20
V
Input forward current
ON-state current
mA
ION
Topr
-20
100
65
Operating temperature
Note: The recommended operating conditions are given as a design guide necessary to obtain the intended
performance of the device. Each parameter is an independent value. When creating a system design using
this device, the electrical characteristics specified in this data sheet should also be considered.
©2017-2018
Toshiba Electronic Devices & Storage Corporation
2018-09-21
Rev.3.0
2