5秒后页面跳转
TLC59108IPWR PDF预览

TLC59108IPWR

更新时间: 2024-02-21 23:01:25
品牌 Logo 应用领域
德州仪器 - TI 显示驱动器驱动程序和接口接口集成电路光电二极管PC
页数 文件大小 规格书
31页 809K
描述
8-BIT Fm+ I2C-BUS CONSTANT-CURRENT LED SINK DRIVER

TLC59108IPWR 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:TSSOP
包装说明:TSSOP-20针数:20
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01Factory Lead Time:1 week
风险等级:1.63Samacsys Confidence:3
Samacsys Status:ReleasedSamacsys PartID:417130
Samacsys Pin Count:20Samacsys Part Category:Integrated Circuit
Samacsys Package Category:Small Outline PackagesSamacsys Footprint Name:tssop-20
Samacsys Released Date:2017-01-12 12:59:53Is Samacsys:N
数据输入模式:SERIAL输入特性:STANDARD
接口集成电路类型:LED DISPLAY DRIVERJESD-30 代码:R-PDSO-G20
JESD-609代码:e4长度:6.5 mm
湿度敏感等级:1复用显示功能:NO
功能数量:1区段数:8
端子数量:20最高工作温度:85 °C
最低工作温度:-40 °C输出特性:CONSTANT-CURRENT
封装主体材料:PLASTIC/EPOXY封装代码:TSSOP
封装等效代码:TSSOP20,.25封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH峰值回流温度(摄氏度):260
电源:3.3/5 V认证状态:Not Qualified
座面最大高度:1.2 mm子类别:Display Drivers
最大压摆率:28 mA最大供电电压:5.5 V
最小供电电压:3 V标称供电电压:5 V
表面贴装:YES温度等级:INDUSTRIAL
端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)端子形式:GULL WING
端子节距:0.65 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:4.4 mm
最小 fmax:1 MHzBase Number Matches:1

TLC59108IPWR 数据手册

 浏览型号TLC59108IPWR的Datasheet PDF文件第2页浏览型号TLC59108IPWR的Datasheet PDF文件第3页浏览型号TLC59108IPWR的Datasheet PDF文件第4页浏览型号TLC59108IPWR的Datasheet PDF文件第5页浏览型号TLC59108IPWR的Datasheet PDF文件第6页浏览型号TLC59108IPWR的Datasheet PDF文件第7页 
TLC59108  
www.ti.com .................................................................................................................................................................................................. SLDS156MARCH 2009  
8-BIT Fm+ I2C-BUS CONSTANT-CURRENT LED SINK DRIVER  
1
FEATURES  
2
Eight LED Drivers (Each Output Programmable  
At Off, On, Programmable LED Brightness,  
Programmable Group Dimming/Blinking Mixed  
With Individual LED Brightness  
Software Reset Feature (SWRST Call) Allows  
Device to be Reset Through I2C Bus  
Up to 14 Possible Hardware-Adjustable  
Individual I2C Bus Addresses Per Device, So  
That Each Device Can Be Programmed  
Eight Constant-Current Open-Drain Output  
Channels  
Open-Load/Overtemperature Detection Mode  
to Detect Individual LED Errors  
256-Step (8-Bit) Linear Programmable  
Brightness Per LED Output Varying From Fully  
Off (Default) to Maximum Brightness Using a  
97-kHz PWM Signal  
Output State Change Programmable on the  
Acknowledge or the Stop Command to Update  
Outputs Byte by Byte or All at the Same Time  
(Default to Change on Stop)  
256-Step Group Brightness Control Allows  
General Dimming (Using a 190-Hz PWM Signal  
From Fully Off to Maximum Brightness  
(Default)  
Output Current Adjusted Through an External  
Resistor  
Constant Output Current Range: 10 mA to  
120 mA  
256-Step Group Blinking With Frequency  
Programmable From 24 Hz to 10.73 s and Duty  
Cycle From 0% to 99.6%  
Maximum Output Voltage: 17 V  
25-MHz Internal Oscillator Requires No  
External Components  
1-MHz Fast Mode Plus Compatible I2C Bus  
Interface With 30-mA High Drive Capability on  
SDA Output for Driving High-Capacitive Buses  
Four Hardware Address Pins Allow 14  
TLC59108 Devices to be Connected to the  
Same I2C Bus  
Four Software-Programmable I2C Bus  
Addresses (One LED Group Call Address and  
Three LED Sub Call Addresses) Allow Groups  
of Devices to be Addressed at the Same Time  
in Any Combination. For Example, One  
Register Used for All Call, so That All the  
TLC59108 Devices on the I2C Bus Can be  
Addressed at the Same Time, and the Second  
Register Can be Used for Three Different  
Addresses so That One-Third of All Devices on  
the Bus Can be Addressed at the Same Time  
in a Group.  
Internal Power-On Reset  
Noise Filter on SCL/SDA Inputs  
No Glitch on Power Up  
Active-Low Reset  
Supports Hot Insertion  
Low Standby Current  
3.3-V or 5-V Supply Voltage  
5.5-V Tolerant Inputs  
Offered in 20-Pin TSSOP (PW) and QFN (RGY)  
Packages  
Software Enable and Disable for I2C Bus  
Address  
–40°C to 85°C Operation  
DESCRIPTION/ORDERING INFORMATION  
The TLC59108 is an I2C bus controlled 8-bit LED driver that is optimized for red/green/blue/amber (RGBA) color  
mixing and backlight application for amusement products. Each LED output has its own 8-bit resolution  
(256 steps) fixed-frequency individual PWM controller that operates at 97 kHz, with a duty cycle that is adjustable  
from 0% to 99.6%. The individual PWM controller allows each LED to be set to a specific brightness value. An  
additional 8-bit resolution (256 steps) group PWM controller has both a fixed frequency of 190 Hz and an  
adjustable frequency between 24 Hz to once every 10.73 seconds, with a duty cycle that is adjustable from 0%  
to 99.6%. The group PWM controller dims or blinks all LEDs with the same value.  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
2
All trademarks are the property of their respective owners.  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2009, Texas Instruments Incorporated  

与TLC59108IPWR相关器件

型号 品牌 获取价格 描述 数据表
TLC59108IRGYR TI

获取价格

8-BIT Fm+ I2C-BUS CONSTANT-CURRENT LED SINK DRIVER
TLC59108RGY TI

获取价格

Works with MSP430 Launchpad
TLC5910PZP TI

获取价格

LED DRIVER
TLC5911 TI

获取价格

LED DRIVER
TLC59116 TI

获取价格

16-CHANNEL Fm+ I2C-BUS CONSTANT-CURRENT LED SINK DRIVER
TLC59116_1 TI

获取价格

16-CHANNEL Fm+ I2C-BUS CONSTANT-CURRENT LED SINK DRIVER
TLC59116F TI

获取价格

16-CHANNEL FAST-MODE PLUS I2C BUS LED DRIVER
TLC59116F_15 TI

获取价格

16-Channel Fast-Mode Plus I2C Bus LED Driver
TLC59116FIPWR TI

获取价格

16-CHANNEL FAST-MODE PLUS I2C BUS LED DRIVER
TLC59116FIRHBR TI

获取价格

16-CHANNEL FAST-MODE PLUS I2C BUS LED DRIVER