TLC5910
LED DRIVER
SLLS392 – NOVEMBER 1999
Drive Capability and Output Counts
– 80 mA (Current Sink) x 16 Bits
Protection
– WDT (Watchdog Timer) Function (Turn
Output Off When Scan Signal Stopped)
– TSD (Thermal Shutdown) Function (Turn
Output Off When Junction Temperature
Exceeds Limit)
Constant Current Output Range
– 5 to 80 mA (Current Value Setting for All
Output Terminals Using External Resistor
and Internal Brightness Control Register)
LOD
Constant Current Accuracy
– LED Open Detection (Detection for LED
Disconnection)
– ±4% (Maximum Error Between Bits)
Voltage Applied to Constant Current Output
Terminals
– Minimum 0.4 V (Output Current 5 to
‡
Data Input/Output
– Port A (for Data Display)
– Clock Synchronized 10 Bit Parallel
Input (Schmitt Triggered Input)
– Clock Synchronized 10 Bit Parallel
Output (3-State Output)
40 mA)
– Minimum 0.7 V (Output Current 40 to
80 mA)
1024 Gray Scale Display
– Pulse Width Control 1024 Steps
– Port B (for Dot Correction Data)
– Clock Synchronized 6 Bit Parallel
Input (Schmitt-Triggered Input)
– Clock Synchronized 6 Bit Parallel
Output
†
Brightness Adjustment
– All Output Current Adjustment for 64
Steps (Adjustment for Brightness
Deviation Between LED Modules)
– Output Current Adjustment by Output
(OUT0 to OUT15) for 64 Steps
(Adjustment for Brightness Deviation
Between Dots)
– Brightness Control by 16 Steps
Frequency Division Gray Scale Control
Clock (Brightness Adjustment for Panel)
Input/Output Signal Level
– CMOS Level
Power Supply Voltage
– 4.5 V to 5.5 V (Logic, Analog and
Constant Current)
– 3 V to 5.5 V (Interface)
Maximum Output Voltage . . . 15 V (Max)
Data Transfer Rate . . . 20 MHz (Max)
Gray Scale Clock Generation
– Gray Scale Control Clock Generation by
Internal PLL or External Input Selectable
Gray Scale Clock Frequency
– 16 MHz (Max) Using Internal PLL
– 8 MHz (Max) Using External Clock
Clock Invert/Noninvert Selectable
– Clock Invert Selectable to Reduce
Changes in Duty Ratio at Cascade
Operation
Operating Free-Air Temperature Range
–20°C to 85°C
100-Pin HTQFP Package (P =4.7 W,
D
T = 25°C)
A
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
†
‡
These functions are adjustable independently.
Allows the writting of all the data at port A by setting the logic to 1.
Copyright 1999, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265