DC/DC Converters
TEN 60N Series
60 Watt
General Specifications
Temperature ranges
– Operating
– Casing temperature
– Storage
–40°C to +85°C (with derating)
+105°C max.
–55°C to +125°C
Power derating
– Natural convection
– Natural convection with heat sink (optional)
2.5 %/K above +50°C
2.25 %/K above +55°C
Thermal impedance
– Natural convection
– Natural convection with heat sink (optional)
10.8 K/W
10.3 K/W
Over-temperatur protection
at 115°C
Humidity (non condensing)
5 – 95 % rel. H
1500 VDC
Isolation voltage (60 sec.) – Input / Output
Isolation resistance
Isolation capacitance
Switching frequency
– Input / Output
– Input / Output
>1 GOhm
2’200 pF max.
250 kHz typ. (pulse width modulation PWM)
Thermal shock, mechanical shock & vibration
MIL-STD-810F
– Test conditions
www.tracopower.com/products/mil810.pdf
Safety standards
UL/cUL 60950-1, IEC/EN 60950-1
– Certification documents
– On:
– Off:
www.tracopower.com/overview/ten60n
Remote On/Off
3.0 ... 12 VDC or open circuit
0 ... 1.2 VDC or short circuit pin 3 and pin 2
3.0 mA
– Off idle current:
Reliability, calculated MTBF (MIL-HDBK-217F, at +70°C, ground benign)
880’000 h
Environmental compliance – Reach
www.tracopower.com/products/reach-declaration.pdf
RoHS directive 2011/65/EU
– RoHS
Output Voltage Adjustment (for single output models only)
Trim up
Trim down
Trim
+Vout
Rd
Ru
Trim
-
Vout
Nominal output voltage at open Trim input
Ru, Rd for adjustment to be adviced
Supporting documents: www.tracopower.com/overview/ten60n
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 4