Datasheet > TCTAL0G686M8R

TCTAL0G686M8R

更新时间： 2022-12-19 13:54:55

品牌	Logo	应用领域
罗姆 - ROHM		/
页数	文件大小	规格书
7页	134K
描述
Chip tantalum capacitors

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

TCTAL0G686M8R 数据手册

TCT Series AL Case

Data Sheet

Item

Performance

Test conditions (based on JIS C 5101−1 and JIS C 5101− 3)

As per 4.29 JIS C 5101-1

As per 4.13 JIS C 5101-3

Temperature

Stability

Temp.

∆C / C

Df (tan δ)

L.C.

−55°C

Within 0/−15% of initial value

Shall be satisfied the voltage on " Standard list "

−

Temp.

+85°C

∆C / C

Within +15/0% of initial value

Shall be satisfied the voltage on " Standard list "

5µA or 0.1CV whichever is greater

Df (tan δ)

L.C.

Temp.

∆C / C

Df (tan δ)

L.C.

+125°C

Within +20/0% of initial value

Shall be satisfied the voltage on " Standard list "

6.3µA or 0.125CV whichever is greater

There should be no significant abnormality.

As per 4.26JIS C 5101-1

Surge voltage Appearance

As per 4.14JIS C 5101-3

L.C.

Less than 200% of initial value

Within 20% of initial value

Less than 200% of initial limit

Apply the specified surge voltage every 5 0.5 min.

for 30 5 s. each time in the atmospheric condition of 85 2°C.

Repeat this procedure 1,000 times.

After the specimens, leave it at room temperature for

over 24h and then measure the sample.

∆C / C

Df (tan δ)

Loading at

High temperature

Appearance

L.C.

There should be no significant abnormality.

Less than 200% of initial limit

As per 4.23 JIS C 5101-1

As per 4.15 JIS C 5101-3

After applying the rated voltage for 2000+72/0 h without

discontinuation via the serial resistance of 3Ω or less

at a temperature of 85 2°C, leave the sample at room

temperature / humidity for over 24h and measure the value.

Within 20% of initial value

∆C / C

Df (tan δ)

Capacitance

Appearance

Less than 200% of initial limit

Terminal

strength

The measured value should be stable.

There should be no significant abnormality.

As per 4.35 JIS C 5101-1

As per 4.9 JIS C 5101-3

A force is applied to the terminal until it bends to 1mm and

by a prescribed tool maintain the condition for 5s.

(See the figure below)

(Unit : mm)

F (Apply force)

R230

thickness=1.6mm

www.rohm.com

2009.01 - Rev.G

4/6

1 2 345 6 7

中文翻译

下载PDF

与TCTAL0G686M8R相关器件

型号	品牌	获取价格	描述	数据表
TCTAL0J105M8R	ROHM	获取价格	Chip tantalum capacitors
TCTAL0J106M8R	ROHM	获取价格	Chip tantalum capacitors
TCTAL0J107M8R	ROHM	获取价格	Chip tantalum capacitors
TCTAL0J107M8R	TI	获取价格	DRV2603 ERM/LRA Haptic Driver Evaluation Kit
TCTAL0J107M8R	KYOCERA AVX	获取价格	Chip Tantalum Capacitors (Large Capacitance)
TCTAL0J107M8R-02	KYOCERA AVX	获取价格	Chip Tantalum Capacitors (Large Capacitance)
TCTAL0J107M8R-E1	KYOCERA AVX	获取价格	Chip Tantalum Capacitors (Large Capacitance)
TCTAL0J107M8R-H10	KYOCERA AVX	获取价格	Chip Tantalum Capacitors (Large Capacitance)
TCTAL0J107M8R-Y2	KYOCERA AVX	获取价格	Chip Tantalum Capacitors (Large Capacitance)
TCTAL0J156M8R	ROHM	获取价格	Chip tantalum capacitors