TCA6424A
www.ti.com
SCPS193B –JULY 2010–REVISED SEPTEMBER 2010
LOW-VOLTAGE 24-BIT I2C AND SMBus I/O EXPANDER
WITH INTERRUPT OUTPUT, RESET, AND CONFIGURATION REGISTERS
Check for Samples: TCA6424A
1
FEATURES
•
Operating Power-Supply Voltage Range of
1.65 V to 5.5 V
•
•
•
Polarity Inversion Register
Internal Power-On Reset
•
Allows Bidirectional Voltage-Level Translation
and GPIO Expansion Between:
Power Up With All Channels Configured as
Inputs
–
–
–
–
1.8-V SCL/SDA and
1.8-V, 2.5-V, 3.3-V, or 5-V P Port
•
•
•
No Glitch On Power Up
Noise Filter on SCL/SDA Inputs
2.5-V SCL/SDA and
1.8-V, 2.5-V, 3.3-V, or 5-V P Port
Latched Outputs With High-Current Drive
Maximum Capability for Directly Driving LEDs
3.3-V SCL/SDA and
1.8-V, 2.5-V, 3.3-V, or 5-V P Port
•
•
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
5-V SCL/SDA and
1.8-V, 2.5-V, 3.3-V, or 5-V P Port
ESD Protection Exceeds JESD 22
–
–
–
2000-V Human-Body Model (A114-A)
200-V Machine Model (A115-A)
•
•
•
I2C to Parallel Port Expander
Low Standby Current Consumption of 1 mA
1000-V Charged-Device Model (C101)
Schmitt-Trigger Action Allows Slow Input
Transition and Better Switching Noise
Immunity at the SCL and SDA Inputs
RGJ/RSM PACKAGE
(BOTTOM VIEW)
–
–
–
–
Vhys = 0.18 V Typ at 1.8 V
Vhys = 0.25 V Typ at 2.5 V
Vhys = 0.33 V Typ at 3.3 V
Vhys = 0.5 V Typ at 5 V
32
31
30
29
28
27
26
25
9
P10
P11
P12
P13
P14
P15
P16
P17
INT
V
10
11
12
13
14
15
16
CCI
SDA
•
•
•
•
•
5-V Tolerant I/O Ports
SCL
Exposed
Center Pad
Active-Low Reset Input (RESET)
Open-Drain Active-Low Interrupt Output (INT)
400-kHz Fast I2C Bus
RESET
V
CCP
ADDR
GND
Input/Output Configuration Register
If used, the exposed center pad must be
connected as a secondary ground or left
electrically open.
DESCRIPTION/ORDERING INFORMATION
This 24-bit I/O expander for the two-line bidirectional bus (I2C) is designed to provide general-purpose remote I/O
expansion for most microcontroller families via the I2C interface [serial clock (SCL) and serial data (SDA)].
The major benefit of this device is its wide VCC range. It can operate from 1.65 V to 5.5 V on the P-port side and
on the SDA/SCL side. This allows the TCA6424A to interface with next-generation microprocessors and
microcontrollers on the SDA/SCL side, where supply levels are dropping down to conserve power. In contrast to
the dropping power supplies of microprocessors and microcontrollers, some PCB components, such as LEDs,
remain at a 5-V power supply.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2010, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.