Datasheet > SPC3012FT-100MZF

SPC3012FT-100MZF

更新时间： 2022-12-18 04:08:16

品牌	Logo	应用领域
SUPERWORLD		功率感应器
页数	文件大小	规格书
5页	241K
描述
SMD POWER INDUCTORS

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

SPC3012FT-100MZF 数据手册

SMD POWER INDUCTORS

SPC3012FT SERIES

6. RELIABILITY & TEST CONDITION :

ITEM

PERFORMANCE

TEST CONDITION

Electrical Characteristics Test

Dielectric withstand voltage

There shall be no damage or problems.

AC 100V voltage shall be applied for 1 minute across the

top surface and the terminal of this sample

Temperature characteristics

High temperature storage

ǻL/L20°C<±10%

The test shall be performed after the sample has stabilized

in an ambient temperature of -20 to +85°C,and the value

calculated based on the value applicable in a normal

0~2000 ppm/°C

temperature and normal humidity shall be ǻL/L20°C<±10%.

ǻL/Lo<±10%

The sample shall be left for 96±4 hours in an atmosphere

with a temperature of 85±2°C and a normal humidity.

Upon completion of the measurement shall be made after

the sample has been left in a normal temperature and

normal humidity for 1 hour.

There shall be no mechanical damage.

Low temperature storage

Change of temperature

ǻL/Lo<±10%

There shall be no mechanical damage.

The sample shall be left for 96±4 hours in an atmosphere

with a temperature of -25±3°C.

Upon completion of the test, the measurement shall be

made after the sample has been left in a normal temperature

and normal humidity for 1 hour.

ǻL/Lo<±10%

The sample shall be subject to 5 continuous cycles, such as

shown in the table 2 below and then it shall be subjected to

standard atmospheric conditions for 1 hour, after which

measurement shall be made.

There shall be no other damage of problems

Temperature

-25±3°C

(Thermostat No.1)

Standard

atmospheric

Duration

30 min.

5 sec. or less

No.1ĺNo.2

85±2°C

30 min.

(Thermostat No.2)

5 sec. or less

No.2ĺNo.1

Standard

atmospheric

Moisture storage

ǻL/Lo<±10%

The sample shall be left for 96±4 hours in a temperature of

40±2°C and a humidity(RH) of 90~95%.

Upon completion of the test, the measurement shall be

made after the sample has been left in a normal temperature

and normal humidity more than 1 hour.

There shall be no mechanical damage.

NOTE : Specifications subject to change without notice. Please check our website for latest information.

04.01.2010

SUPERWORLD ELECTRONICS (S) PTE LTD

PG. 4

1 2 345

中文翻译

下载PDF

与SPC3012FT-100MZF相关器件

型号	品牌	获取价格	描述	数据表
SPC3012FT150F	SUPERWORLD	获取价格	Low Profile Power Inductors
SPC3012FT-150MZF	SUPERWORLD	获取价格	SMD POWER INDUCTORS
SPC3012FT1R0F	SUPERWORLD	获取价格	Low Profile Power Inductors
SPC3012FT-1R0NZF	SUPERWORLD	获取价格	SMD POWER INDUCTORS
SPC3012FT1R2F	SUPERWORLD	获取价格	Low Profile Power Inductors
SPC3012FT-1R2NZF	SUPERWORLD	获取价格	SMD POWER INDUCTORS
SPC3012FT1R5F	SUPERWORLD	获取价格	Low Profile Power Inductors
SPC3012FT-1R5NZF	SUPERWORLD	获取价格	SMD POWER INDUCTORS
SPC3012FT220F	SUPERWORLD	获取价格	Low Profile Power Inductors
SPC3012FT-220MZF	SUPERWORLD	获取价格	SMD POWER INDUCTORS