SN74AVCA406
MMC, SD CARD, Memory Stick, SmartMedia, AND xD-Picture Card
±15-kV ESD-PROTECTED VOLTAGE-TRANSLATION TRANSCEIVER
www.ti.com
SCES615H–OCTOBER 2004–REVISED JANUARY 2007
FEATURES
•
Transceiver for Memory Card Interface
[MultiMediaCard (MMC), Secure Digital (SD),
Memory Stick™ Compliant Products,
SmartMedia Card, and xD-Picture Card™]
•
•
ESD Protection for Card-Side Pins (B Port)
–
±15 kV (±12 kV on Pin 14B) – IEC 61000-4-2
ESD, Air-Gap Discharge
–
±8 kV – IEC 61000-4-2 ESD, Contact
•
•
•
Configurable I/O Switching Levels With
Dual-Supply Pins Operating Over Full 1.4-V to
3.6-V Power-Supply Range
Discharge
ESD Protection for A-Port Pins (Tested Per
JESD 22) Exceeds
For Low-Power Operation, A Ports Are Placed
in High-Impedance State When Card-Side
Supply Voltage Is Switched Off
–
2000-V Human-Body Model (A114-B
1000-V Charged-Device Model (C101)
–
xxxxxxx
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
DESCRIPTION/ORDERING INFORMATION
The SN74AVCA406 is a transceiver for interfacing microprocessors with MultiMediaCards (MMCs), secure
digital (SD) cards, Memory Stick™ compliant products, SmartMedia cards, or xD-Picture Cards™. It integrates
high ESD protection, which eliminates the need for external ESD diodes. Two supply-voltage pins allow the
A-port and B-port input switching thresholds to be configured separately. The A port is designed to track VCCA
,
while the B port is designed to track VCCB0 and VCCB1. VCCA ,VCCB0 and VCCB1 can accept any supply voltage
from 1.4 V to 3.6 V.
Memory card standards recommend high ESD protection for devices that connect directly to the external
memory card. To meet this need, the SN74AVCA406 incorporates ±15-kV air-gap discharge and ±8-kV contact
discharge protection on the card side. If VCCB0 and VCCB1 are switched off (no card inserted), the A-port outputs
are placed in the high-impedance state to conserve power.
The SN74AVCA406 enables system designers to easily interface low-voltage microprocessors to different
memory cards operating at higher voltages. The mode (MODE0 and MODE1) pins are used to configure the
device to interface with different types of cards.
The SN74AVCA406 is offered in the 48-ball MicroStar Jr.™ ball grid array (BGA) package. This package has
dimensions of 4 × 4 mm, with a 0.5-mm ball pitch for effective board-space savings. Memory cards are widely
used in mobile phones, PDAs, digital cameras, personal media players, camcorders, set-top boxes, etc. Low
static power consumption and small package size make the SN74AVCA406 an ideal choice for these
applications.
ORDERING INFORMATION
TA
PACKAGE(1)
ORDERABLE PART NUMBER
SN74AVCA406DGGR
TOP-SIDE MARKING
TSSOP – DGGR
VFBGA – GQC
Tape and reel
Tape and reel
Tape and reel
AVCA406
–40°C to 85°C
SN74AVCA406GQCR
WM406
VFBGA – ZQC (Pb-free)
SN74AVCA406ZQCR
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright © 2004–2007, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.