SGM4056
High Input Voltage Charger
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
VOVP
(V)
PACKAGE
DESCRIPTION
PACKAGE
MARKING
PACKING
OPTION
MODEL
ORDER NUMBER
SGM
G9DB
XXXXX
6.8V
TDFN-3×3-8L
SGM4056-6.8YTDB8G/TR
Tape and Reel, 3000
-40℃ to +85℃
SGB
XXXX
6.8V
6.8V
TDFN-2×3-8L
TDFN-2×2-8L
SGM4056-6.8YTDC8G/TR
SGM4056-6.8YTDE8G/TR
Tape and Reel, 3000
Tape and Reel, 3000
-40℃ to +85℃
-40℃ to +85℃
SG7
XXXX
SGM
SOIC-8
(Exposed Pad)
6.8V
SGM4056-6.8YPS8G/TR
4056-6.8YPS8 Tape and Reel, 2500
XXXXX
-40℃ to +85℃
-40℃ to +85℃
SGM4056
SGM
GADB
XXXXX
10.5V
TDFN-3×3-8L
SGM4056-10.5YTDB8G/TR
Tape and Reel, 3000
SGC
XXXX
10.5V
10.5V
TDFN-2×3-8L
TDFN-2×2-8L
SGM4056-10.5YTDC8G/TR
SGM4056-10.5YTDE8G/TR
Tape and Reel, 3000
Tape and Reel, 3000
-40℃ to +85℃
-40℃ to +85℃
SG8
XXXX
SGM
SOIC-8
(Exposed Pad)
10.5V
SGM4056-10.5YPS8G/TR 4056-10.5YPS8 Tape and Reel, 2500
XXXXX
-40℃ to +85℃
NOTE: XXXX = Date Code. XXXXX = Date Code and Vendor Code.
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
OVERSTRESS CAUTION
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed may cause permanent damage
to the device. Functional operation of the device at these or
any otherconditions beyond those indicated in the operational
sectionof thespecification is not implied. Exposureto absolute
maximum rating conditions for extended periods may affect
reliability.
VIN to GND........................................................ -0.3V to 30V
,
,
, IMIN, IREF, BAT to GND ....... -0.3V to 6V
EN
CHG
PPR
Storage Temperature Range........................-65℃ to +150℃
Package Thermal Resistance
TDFN-3×3-8L, θJA...................................................... 84℃/W
TDFN-2×3-8L, θJA.................................................... 110℃/W
TDFN-2×2-8L, θJA.................................................... 118℃/W
SOIC-8 (Exposed Pad), θJA ....................................... 58℃/W
Junction Temperature.................................................+150℃
Lead Temperature (Soldering 10 sec) ........................+260℃
ESD Susceptibility
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because very small parametric changes could cause the
device not to meet its published specifications.
HBM.............................................................................4000V
MM.................................................................................200V
CDM ............................................................................1000V
RECOMMENDED OPERATING CONDITIONS
Operating Temperature Range.......................-40℃ to +85℃
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuitdesign, specificationor other related things if necessary
without notice at any time.
SG Micro Corp
www.sg-micro.com
OCTOBER 2017
2