SGM41100V
True Monolithic Li-Ion/Polymer
Battery Protector in Tiny Thin Package
GENERAL DESCRIPTION
FEATURES
The SGM41100V is designed for primary protection of
Li-Ion/polymer rechargeable cells. The product integrates
all the protections required for safe operation of polymer
rechargeable cells. The device is packaged in a tiny and
thin package. Its small solution size leaves more space
for fitting the battery cell into a given cavity for small size
wearable devices.
● Ultra-Compact Protection Solution
● Pass Resistance: 42mΩ (TYP)
● Operation Current: 1.1μA (TYP)
● Factory Programmable OVP Threshold Options
4.20V to 4.575V with 0.025V per Step
● Charge/Discharge Over-Current Protection
3 Thresholds Combination Options
● Battery Under-Voltage Protection
2.6V/2.7V/2.8V/3.0V Options
The SGM41100V integrates all the protections and the
required low on-resistance disconnect switch on one
die. The protection features include charge and
discharge protection, detection and protection of a cell
in charge over-voltage, charge over-current, discharge
under-voltage and discharge over-current. Charge and
discharge are prohibited when the battery is lower than
the certain voltage and under-voltage. The product also
disconnects the battery pack in the case of deep
discharge.
● 50nA Deep Discharge Shutdown
● Input Surge Clamping
● Input Over-Voltage Safe
● Load Short-Circuit Safe
● Reverse Polarity Battery Safe
● Input Reversed-Attaching Safe
● Battery Pack Paralleling Safe
● Locked-Off for Delivery/Assembly
● Available in a Green UTDFN-1.5×2-6L Package
The SGM41100V operates in -40℃ to +85℃ temperature
range, and is in a thin and low profile UTDFN-1.5×2-6L
package. This package with a nominal height of 0.5mm
is convenient for small cell packing designs.
APPLICATIONS
IoT Gadgets
Wearable Devices
Battery Packs
TYPICAL APPLICATION
1
6
1μF
SGM
41100V
2
3
5
4
NOTE: The short-circuit of both ends (P and M) of the battery should be avoided during the battery assembly process.
Figure 1. Typical Application Circuit
SG Micro Corp
SEPTEMBER 2021 – REV. A. 1
www.sg-micro.com