SGM2593/SGM2593D
Power Distribution Switches
GENERAL DESCRIPTION
FEATURES
The SGM2593 and SGM2593D are single channel
power distribution switches. The switch is controlled by
the EN pin and operates from 2.5V to 6V supply voltage.
It can be used in USB power distribution applications.
● High-side N-MOSFET
● On-Resistance:
TDFN-2×2-6AL: 60mΩ (TYP)
SOT-23-6: 65mΩ (TYP)
● Programmable Current Limit Range: 0.1A to 3A
1.5A at RILIM = 4.53kΩ
The device integrates programmable current limit to
protect the upstream power supply from damage during
over-current or short-circuit condition. It also has the
function of over-temperature protection.
● Input Voltage Range: 2.5V to 6V
● Quiescent Current: 27μA (TYP)
● Shutdown Current: 0.28μA (TYP)
● Soft-Start Function
The device is designed with soft-start circuit to cope
with inrush currents when large capacitive loads are
connected. The nFAULT output will be asserted to low
level during over-current, over-temperature or reverse
voltage condition.
● Over-Temperature Protection
● Under-Voltage Lockout Protection for VIN
● No Reversed Leakage Current (Reverse Blocking)
● Fault Flag (nFAULT Pin)
● Quick Output Discharge (SGM2593D Only)
● 1.2MΩ Pull-Down Resistor at EN Pin
● Available in Green TDFN-2×2-6AL and SOT-23-6
Packages
The SGM2593D further reduces the total solution size
by integrating a 47Ω pull-down resistor for output
discharge when the switch is shut down by EN.
The SGM2593 and SGM2593D are available in Green
TDFN-2×2-6AL and SOT-23-6 packages.
APPLICATIONS
General Purpose Power Switching
USB Bus/Self-Powered Hub
USB Peripheral
ACPI Power Distribution
Smart Phone
LCD TV
TYPICAL APPLICATION
VIN
VIN
RnFAULT
VOUT
VOUT
CIN
10μF
SGM2593D
COUT
10μF
nFAULT
EN
ILIM
On
Off
GND
RILIM
Figure 1. Typical Application Circuit
SG Micro Corp
NOVEMBER2023–REV. A. 2
www.sg-micro.com