SGA-9289 Medium Power Discrete SiGe Transistor
Part Number Ordering Information
Caution: ESD sensitive
Appropriate precautions in handling, packaging and
testing devices must be observed.
Part Number
SGA-9289
Reel Size
13"
Devices/Reel
3000
SGA-9289Z
13"
3000
Pin Description
Pin #
Function
Description
Part Symbolization
1
2
Base
RF Input
The part will be symbolized with the “P2” (“P2Z”
for RoHS version) designator and a dot signifying
pin 1 on the top surface of the package.
Emitter
Connection to ground. Use via holes to reduce lead
inductance. Place vias as close to ground leads as possible.
3
4
Collector
Emitter
RF Output
Same as Pin 2
Mounting and Thermal Considerations
Package Dimensions
It is very important that adequate heat sinking be provided to
minimize the device junction temperature. The following items
should be implemented to maximize MTTF and RF
performance.
.161
.016
.177 .068
.019.118
1. Multiple solder-filled vias are required directly below the
ground tab (pin 4). [CRITICAL]
2. Incorporate a large ground pad area with multiple plated-
through vias around pin 4 of the device. [CRITICAL]
3. Use two point board seating to lower the thermal
resistance between the PCB and mounting plate. Place
machine screws as close to the ground tab (pin 4) as
possible. [RECOMMENDED]
.096
.041
.015
.059
4. Use 2 ounce copper to improve the PCB’s heat spreading
capability. [RECOMMENDED]
DIMENSIONS ARE IN INCHES
Recommended Mounting Configuration for
Optimum RF and Thermal Performance
Ground Plane
Plated Thru
Holes
(0.020" DIA)
SOT-89
Package
Machine
Screws
303 S. Technology Ct.
Broomfield, CO 80021
Phone: (800) SMI-MMIC
4
http://www.sirenza.com
EDS-101498 Rev G