™
RUGGEDTIGEREYE SYSTEMS
(1.27 mm) .050" PITCH
M A X
ꢀ
3.2
ꢀ
b p s
A
m
p
s
FEATURES & BENEFITS
• Screw down, locking clip, friction latching and
weld tab ruggedizing options
• Shrouded, polarized and keyed
• Surface mount or through-hole tails
• High-density, four row design (FOLC/MOLC Series)
• Discrete wire assemblies available in single or double row, 28
and 30 AWG PVC or Teflon® wire; contact asp@samtec.com
for custom solutions
• Cable components (ISDF/CC03) and tooling available
IDC cable
assemblies with
rugged strain relief
(FFSD/FFMD, FFTP/FMTP)
Locking for
increased
unmating force
(SFML/TFML)
Dupont™ Teflon® is a registered trademark of the
E.I. du Pont de Nemours and Company or its affiliates.
KEY SPECIFICATIONS (TFM/SFM)
STACK
HEIGHTS
INSULATOR
MATERIAL
CONTACT
MATERIAL
OPERATING
TEMP RANGE
CURRENT
RATING
VOLTAGE
RATING
MAX
CYCLES
PITCH
PLATING
10,000
with 30 µ"
(0.76 µm) Au
BeCu (SFM)
Au or Sn over 50 µ"
(1.27 µm) Ni
3.2 A per pin
(2 pins powered)
1.27 mm
6 to 12 mm
Black LCP
-55 °C to +125 °C
250 VAC
Phosphor Bronze
(TFM)
(Call Samtec for
E.L.P.™ plating
option)
F-221
samtec.com/127mm-TigerEye
Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specifications which are subject to change without notice.