5秒后页面跳转
SC16C652IB48,151 PDF预览

SC16C652IB48,151

更新时间: 2024-02-15 15:38:05
品牌 Logo 应用领域
恩智浦 - NXP 通信时钟数据传输外围集成电路
页数 文件大小 规格书
41页 177K
描述
SC16C652IB48

SC16C652IB48,151 技术参数

生命周期:Obsolete零件包装代码:QFP
包装说明:LFQFP,针数:48
Reach Compliance Code:unknownHTS代码:8542.31.00.01
风险等级:5.75Is Samacsys:N
其他特性:ALSO OPERATES AT 2.5V SUPPLY地址总线宽度:3
边界扫描:NO最大时钟频率:80 MHz
通信协议:ASYNC, BIT最大数据传输速率:0.625 MBps
外部数据总线宽度:8JESD-30 代码:S-PQFP-G48
长度:7 mm低功率模式:YES
串行 I/O 数:2端子数量:48
最高工作温度:85 °C最低工作温度:-40 °C
封装主体材料:PLASTIC/EPOXY封装代码:LFQFP
封装形状:SQUARE封装形式:FLATPACK, LOW PROFILE, FINE PITCH
认证状态:Not Qualified座面最大高度:1.6 mm
最大供电电压:3.63 V最小供电电压:2.97 V
标称供电电压:3.3 V表面贴装:YES
技术:CMOS温度等级:INDUSTRIAL
端子形式:GULL WING端子节距:0.5 mm
端子位置:QUAD宽度:7 mm
uPs/uCs/外围集成电路类型:SERIAL IO/COMMUNICATION CONTROLLER, SERIALBase Number Matches:1

SC16C652IB48,151 数据手册

 浏览型号SC16C652IB48,151的Datasheet PDF文件第2页浏览型号SC16C652IB48,151的Datasheet PDF文件第3页浏览型号SC16C652IB48,151的Datasheet PDF文件第4页浏览型号SC16C652IB48,151的Datasheet PDF文件第5页浏览型号SC16C652IB48,151的Datasheet PDF文件第6页浏览型号SC16C652IB48,151的Datasheet PDF文件第7页 
SC16C652  
Dual UART with 32 bytes of transmit and receive FIFOs  
Rev. 04 — 20 June 2003  
Product data  
1. Description  
The SC16C652 is a 2 channel Universal Asynchronous Receiver and Transmitter  
(UART) used for serial data communications. Its principal function is to convert  
parallel data into serial data and vice versa. The UART can handle serial data rates  
up to 5 Mbits/s. The SC16C652 is pin compatible with the SC16C2550. It will  
power-up to be functionally equivalent to the 16C2450. The SC16C652 provides  
enhanced UART functions with 32-byte FIFOs, modem control interface, DMA mode  
data transfer. The DMA mode data transfer is controlled by the FIFO trigger levels  
and the TXRDY and RXRDY signals. On-board status registers provide the user with  
error indications and operational status. System interrupts and modem control  
features may be tailored by software to meet specific user requirements. An internal  
loop-back capability allows on-board diagnostics. Independent programmable baud  
rate generators are provided to select transmit and receive baud rates.  
The SC16C652 operates at 5 V, 3.3 V and 2.5 V and the Industrial temperature  
range, and is available in a plastic LQFP48 package.  
2. Features  
2 channel UART  
5 V, 3.3 V and 2.5 V operation  
Industrial temperature range  
Pin and functionally compatible to 16C2450 and software compatible with  
SC16C650  
Up to 5 Mbits/s data rate at 5 V and 3.3 V, and 3 Mbit/s at 2.5 V  
32-byte transmit FIFO to reduce the bandwidth requirement of the external CPU  
32-byte receive FIFO with error flags to reduce the bandwidth requirement of the  
external CPU  
Independent transmit and receive UART control  
Four selectable Receive and Transmit FIFO interrupt trigger levels  
Automatic software/hardware flow control  
Programmable Xon/Xoff characters  
Software selectable Baud Rate Generator  
Sleep mode  
Standard asynchronous error and framing bits (Start, Stop, and Parity Overrun  
Break)  
Transmit, Receive, Line Status, and Data Set interrupts independently controlled  
 
 

与SC16C652IB48,151相关器件

型号 品牌 描述 获取价格 数据表
SC16C654 NXP Quad UART with 64-byte FIFO and infrared (IrDA) encoder/decoder

获取价格

SC16C654B NXP 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byte FIFOs and infrared (IrDA) en

获取价格

SC16C654BIA68 NXP 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byte FIFOs and infrared (IrDA) en

获取价格

SC16C654BIA68,518 NXP SC16C654B/654DB - 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byte FIFOs and

获取价格

SC16C654BIB64 NXP 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byte FIFOs and infrared (IrDA) en

获取价格

SC16C654BIBM NXP 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byte FIFOs and infrared (IrDA) en

获取价格