YAGEO CORPORATION ALUMINUM ELECTRO LYTIC CAPACITO RS
Miniature Size Aluminum
Electrolytic Capacitors
[ For Low Impedance and Low E.S.R
SC Suitable for Output of Mother Board ]
105°C Single-Ended Lead Aluminum Electrolytic Capacitors For High Frequency Applications
ELECTRICAL CHARACTERISTICS
WorkingVoltage : 6.3 ~ 100V
Operating Temperature : -40º ~ +105ºC
Rate Capacitance Range : 4.7 ~ 15000µF
Capacitance Tolerance : -20 ~ +20%
DC Leakage Current (µA) : I = 0.01 CV(µA) or 3µA Whichever is greater.
( Measurements shall be Made After a 2 Minute Charge at Rated WorkingVoltage )
Dissipation Factor : at 120 Hz, 25ºC
W V (V) : 6.3
D.F (%) : 15
10
14
16
12
25
10
35
10
50
8
63
8
80
7
100
7
DESCRIPTION
For capacitor whose capacitance exceeds 1000µF. The value of D.F(%) is increased by 2% for every
addition of 1000µF.
Used in switching regulator applications in
computers. Especially for high frequency.
W V (V)
:
6.3
10
10
8
16
5
25
4
35
4
50
4
63
4
100
4
Impedance : Z - 40°C / Z + 20°C
Low impedance and E.S.R., high permissible
ripple current at high frequency and higher
operating temperature (-40ºC to +105ºC).
Load Life : 3000 Hours at 105ºC Assured with Full Rated Maximum Ripple Current Applied
5 x 11 ~ 10 x 12 : Life = 2000 Hours
10 x 15 or Higher : Life = 3000 Hours
(a) Capacitance Change :Within 20% of InitialValue
(b) Dissipation Factor : Not Exceed 200% of Initial Requirement
(c) Leakage Current : Not Exceed the Initial Requirement
HighTemperature Load Life at 105ºC for
3000 Hours
Shelf Life : 1000 Hours, No Voltage Applied, at 105ºC
For Detail Specifications, Please Refer to
Engineering Bulletin No. 2063
(a) Capacitance Change :Within 20% of InitialValue
(b) Dissipation Factor : Not Exceed 200 % of Initial Requirement
(c) Leakage Current : Not Exceed 200% of Initial Requirement
DIAGRAM OF DIMENSIONS
Dimensions : mm
Dø
F
dø
Rubber Stand-off
4.0
1.5
2.0
2.5
3.5
5.0
0.45
0.5
Vinyl Sleeve
(P.V.C)
Rubber End Seal
Vinyl Sleeve
(P.V.C)
Rubber End Seal
5.0
6.0
8.0
10.0
12.0
13.0
16.0
18.0
22.0
0.6
0.4Max.
15Min.
L
15Min.
5Min.
L
5Min.
D±0.5
D±0.5
7.5
0.8
0.8
L ≤ 12 L + 1.5Max.
+1.0
-0.5
13≤ L ≤ 15
L
L ≥ 16 L + 2.0Max.
10.0