S-85V1A Series
5.5 V INPUT, 200 mA SYNCHRONOUS STEP-DOWN
SWITCHING REGULATOR WITH 10
μ
A QUIESCENT CURRENT
www.sii-ic.com
© SII Semiconductor Corporation, 2017
Rev.1.0_00
The S-85V1A Series is a step-down switching regulator which features high efficiency and fast transient response.
Since PWM / PFM switching control automatically switches to PFM control when under light load, high efficiency is
realized. This IC is suitable for mobile devices and battery powered devices due to introduction of own distinctive COT
(Constant On-Time) control.
Also, high-density mounting is realized by adopting super-small, thin SNT-6A package. Therefore, the occupancy area
including a coil, an input capacitor and an output capacitor can be reduced to 2.0 mm × 4.5 mm = 9.0 mm2, and it
contributes to miniaturization of electronic equipment.
Features
Applications
• Current consumption:
• Efficiency:
• Fast transient response:
• Input voltage:
• Output voltage:
10 μA quiescent current
93%
COT control
• Bluetooth device
• Wireless sensor network device
• Healthcare equipment
• Smart meter
2.2 V to 5.5 V
0.7 V to 2.5 V, in 0.05 V step
2.6 V to 3.9 V, in 0.1 V step
1.5% (1.0 V ≤ VOUT ≤ 3.9 V)
15 mV (0.7 V ≤ VOUT < 1.0 V)
1.0 MHz (at PWM operation)
450 mΩ
• Portable game device
• Remote control
• Output voltage accuracy:
Package
• Switching frequency:
• SNT-6A
(1.80 mm
• High side power MOS FET on-resistance:
• Low side power MOS FET on-resistance:
• Soft-start function:
× 1.57 mm × t0.5 mm max.)
350 mΩ
1 ms typ.
• Under voltage lockout function (UVLO):
• Thermal shutdown function:
1.8 V typ. (detection voltage)
135°C typ. (detection temperature)
450 mA (at L = 2.2 μH)
• Overcurrent limit function:
•
Automatic recovery type short-circuit protection function:Hiccup control
• Input and output capacitors:
• Operation temperature range:
• Lead-free (Sn 100%), halogen-free
Ceramic capacitor compatible
Ta = −40°C to +85°C
Typical Application Circuit
Efficiency
VOUT(S) = 1.8 V
L
100
2.2 H
V
IN
V
OUT
VIN
SW
80
60
40
20
0
C
OUT
C
IN
10 F
10 F
PVSS
EN
VOUT
V
IN = 2.5 V
VIN = 3.6 V
VIN = 4.2 V
VSS
0.1
1
10
100
1000
IOUT [mA]
1