®
RT8167A
Pin Configurations
(TOP VIEW)
48 47 46 45 44 43 42 41 40 39 38 37
1
2
36
35
34
33
32
31
30
29
28
27
26
25
ISEN1P
ISEN1N
COMP
FB
RGND
IMON
IMONFB
DRPEN
OFS
OFSA
GFXPS2
VCC
ISENAP
ISENAN
COMPA
FBA
RGNDA
IMONA
IMONFBA
VCLK
VDIO
ALERT
DRPENA
VRA_READY
3
4
5
6
GND
7
8
9
49
10
11
12
13 14 15 16 17 18 19 20 21 22 23 24
WQFN-48L 6x6
Functional Pin Description
Pin No.
Pin Name
Pin Function
1
2
3
4
ISEN1P
Positive Current Sense Input of CORE VR
Negative Current Sense Input of CORE VR
ISEN1N
COMP
FB
CORE VR Compensation. This pin is the output node of the error amplifier.
CORE VR Feedback. This is the negative input node of the error amplifier.
Return Ground for CORE VR. This pin is the negative input for differential remote
voltage sensing.
5
RGND
Current Monitor Output of CORE VR. The output voltage VIMON of this pin is
proportional to the output current. For digital output current reporting, detailed
VIMON is generated by built-in ADC.
6
IMON
This pin is used to externally set the current monitor output gain of CORE VR.
Connect this pin with one resistor RIMONFB to CORE VCC_SENSE while IMON pin
is connected to ground with another resistor, RIMON. The current monitor output
gain can be set by the ratio of these two resistors.
7
IMONFB
Droop Enable Mode Setting of CORE VR. An internal 80μA current source is
connected to the DRPEN pin and flows out of this pin for 10μs. Connect this pin to
VCC to enable droop function. Connect this pin to GND to disable droop function.
8
9
DRPEN
OFS
Output Voltage No-Load Offset Setting of CORE VR. Connect to a resistive voltage
divider from VCC to GND to set the pin voltage VOFS for offset setting. Connect this
pin to GND for no offset setting.
Output Voltage No-Load Offset Setting of GFX VR. Connect to a resistive voltage
divider from VCC to GND to set the pin voltage VOFSA for offset setting. Connect this
pin to GND for no offset setting.
10
OFSA
Copyright 2012 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DS8167A-00 January 2012
www.richtek.com
2