®
RT5028C
Integrated PMIC with 4-Channel Synchronous Buck
Converters, 8 LDOs, and MTP Non-Volatile Memory for
Industrial Applications
General Description
Features
z Input Voltage Operating Range is 3.3V to 5.5V
z Step-Down Regulator : VIN Range is 3.3V to 5.5V
` Max Current 2.4A/2A/1.6A/2A
The RT5028C is a highly-integrated low-power high-
performance analog SOC with PMIC in one single chip
designed for Industrial applications.
` Programmable Frequency from 500kHz to 2MHz
` I2C Programmable Output Level
` I2C Programmable Operation Mode (Force PWM
or Auto PSM/PWM)
The RT5028C includes four synchronous step-downDC-
DC converters and eight LDOs for system power.
The RT5028C also embeds one EEPROM (MTP) for
setting sequence and timing etc.
` I2C Programmable Output Discharge Mode
(Discharge or Flatting)
Additionally, the RT5028C PMIC also includes one IRQ
report.
z Linear Regulators : VIN Range is 2.5V to 5.5V
` Max Current 0.3A
` I2C Programmable Output Level
z Embedded 32Bytes MTP for Factory Tuning
` External MTP Pin for Write Protection
z Sequence can be Controlled by I2C or each EN pins
Defined by MASK_GPIO pin.
Ordering Information
RT5028C
Package Type
QW : WQFN-56L 7x7 (W-Type)
Lead Plating System
G : Green (Halogen Free and Pb Free)
z OT/UVP/VIN LV/POWRON press Time Interrupt
(IRQ).
` I2C Control Interface: Support Fast Mode up to
Note :
Richtek products are :
400kb/s
` RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
` Suitable for use in SnPb or Pb-free soldering processes.
z RoHS Compliant and Halogen Free
Applications
z Industrial
Simplified Application Circuit
RT5028C
VIN
VOUTLx
VDDP
SCL
SDA
VINL123
VINL456
VINL78
LXBx
IRQ
RESET
PWRHOLD
PWRON
REBOOT
MTP
VOUTBxS
VINBx
MASK_GPIO
SADDR
ENBx
ENLx
AGND
Copyright 2016 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DS5028C-03 September 2016
www.richtek.com
1