®
RT5028E
Integrated PMIC with 4-Channel Synchronous Buck
Converters, 8 LDOs, and MTP Non-Volatile Memory for
Industrial Applications
General Description
Features
Input Voltage Operating Range is 3.3V to 5.5V
Step-Down Regulator : VIN Range is 3.3V to 5.5V
Max Current 2.4A/2A/1.6A/2A
The RT5028E is a highly-integrated low-power high-
performance analog SOC with PMIC in one single chip
designed for industrial applications.
Programmable Frequency from 500kHz to 2MHz
I2C Programmable Output Level
I2C Programmable Operation Mode (Force PWM
The RT5028E includes four synchronous step-downDC-
DC converters and eight LDOs for system power.
The RT5028E also embeds one EEPROM (MTP) for
setting sequence and timing etc.
or Auto PSM/PWM)
I2C Programmable Output Discharge Mode
(Discharge or Flatting)
Additionally, the RT5028E PMIC also includes one IRQ
report.
Linear Regulators : VIN Range is 2.5V to 5.5V
Max Current 0.3A
I2C Programmable Output Level
Ordering Information
Embedded 32Bytes MTP for Factory Tuning
External MTP Pin for Write Protection
Sequence can be Controlled by I2C or Each EN Pins
Defined by MASK_GPIO Pin
RT5028E
Package Type
QW : WQFN-56L 7x7 (W-Type)
Lead Plating System
G : Green (Halogen Free and Pb Free)
OT/UVP/VIN LV/POWRON Press Time Interrupt (IRQ)
I2C Control Interface : Support Fast Mode up to
400kb/s
Note :
Richtek products are :
RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering processes.
RoHS Compliant and Halogen Free
Applications
Industrial
Simplified Application Circuit
RT5028E
VIN
VOUTLx
VDDP
VINL123
SCL
SDA
IRQ
VINL456
VINL78
LXBx
RESET
PWRHOLD
PWRON
REBOOT
MTP
VOUTBxS
VINBx
MASK_GPIO
SADDR
ENBx
ENLx
AGND
Copyright 2016 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DS5028E-00 October 2016
www.richtek.com
1