RC11xx(HP)-TM
RC25xx(HP)-TM
RC17xx(HP)-TM
R a d i o c r a f t s
E m b e d d e d W i r e l e s s S o l u t i o n s
TinymeshTM RF Transceiver Modules
Product Description
The RC11XX(HP) / RC25XX(HP) / RC17xx(HP)-TM RF Transceiver Modules are compact
surface-mounted high performance modules for wireless mesh networking applications.
The modules feature a fully embedded Tinymesh™ application and multi-hop protocol stack
with automatic network forming and self-healing features. The embedded Tinymesh™
application layer supports a full duplex UART, Analogue- Pulse- and Digital inputs, as well
as PWM and Digital outputs. Serial application data entered on the UART port is transported
automatically to the desired destination node without further interaction from any external
processor. The modules are completely shielded, available as Low Power, High Power and
Long Range Ultra Narrow Band versions, and pre-certified for operation in license free
bands from 169 MHz to 2.4 GHz.
Typical Applications
•
•
•
•
•
•
•
•
Wireless Sensor Networks
Automatic Meter Reading
Alarm- and Security Systems
Building Management
Telemetry Stations
Fleet Management
Asset Tracking
Street Light Control and Monitoring
Key Features
•
•
•
•
•
•
Embedded application layer for I/O control and data collection
Self-forming, self-healing and self-optimizing bi-directional mesh network stack
AES 128 encryption
Selectable Gateway, Router and low power End Device configuration
Configurable digital I/O, PWM (Dimmer) output and analogue inputs
Full Duplex Serial Port with handshake, streaming support and 256-byte buffer for easy
RS232/422/485 wire replacement and MODBUS RTU compatibility
Pulse counter with configurable de-bounce time and detection feedback output
'Walk-by' mode for low power data logging and metering applications
RSSI and Network connect LED output control for simplified field installation
Group-, Broadcast- or Individual addressing modes
Clustered Node Detection and Network Congestion Avoidance (CND/NCA™)
RF Jamming Detection and Alarm, with alarm output and network alarm messaging
Analogue- and Digital level triggered event messages.
Time-generated and event-triggered status messages
Locator Function for asset tracking applications
Network Busy Detection for ad hoc networks with multiple, roaming Gateway Devices
Multiple Gateway support for redundancy and automatic network load sharing
Small size (12.7 x 25.4 x 3.7 mm), shielded and optimized for SMD mounting
No external components
Wide supply voltage range
RC1x40/80(HP)-TM conforms with EU RED directive (EN 300 220, EN 301 489, EN
60950)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
RC119x-TM conforms with regulations for operation under FCC CFR 47 part 15
RC117x(HP)-TM complies with G.S.R.564(E) (G.S.R.168(E)).
RC2500(HP)-TM complies with EN 300 328 (Europe), FCC CFR 47 part 15 (US) and ARIB
STD-T66 (Japan)
•
RC117x-TM and RC117xHP-TM comply to IEEE 802.15.4.g PHY mode 0 encoding when
configured for RF Data Rate 8.
©2018 Radiocrafts AS
©2018 Tiny Mesh AS
RC11xx(HP)/25xx(HP)/17xx(HP)-TM Data Sheet rev. 1.52.1
Page 1 of 90