Not for new design. Use new F461-F464 Series.
R74 MInIVeRSIOn
MKP ꢀeries
MeTAllIZeD POlyPROPylene FIlM CAPACITOR
A.C. APPlICATIOnS
PRꢁDUCT CꢁDꢂ: R74
single sided metallized
polypropylene film
3 sꢃctioꢂs
(700Vac)
Ratꢃd
Cap.
600Vac (3 sꢃctioꢂs)
Max
dv/dt
(V/µs)
Max K0
Part numbꢃr
ꢀtd dimensions
B
H
L
p
(V2/µs)
470 pF 4.0 9.0 13.0 10.0 10000 4000 ꢂ4
680 pF 4.0 9.0 13.0 10.0 10000 4000 ꢂ4
820 pF 4.0 9.0 13.0 10.0 10000 4000 ꢂ4
1000 pF 4.0 9.0 13.0 10.0 10000 4000 ꢂ4
1200 pF 4.0 9.0 13.0 10.0 10000 4000 ꢂ4
1500 pF 4.0 9.0 13.0 10.0 10000 4000 ꢂ4
1800 pF 4.0 9.0 13.0 10.0 10000 4000 ꢂ4
2200 pF 5.0 11.0 13.0 10.0 10000 4000 ꢂ4
2700 pF 5.0 11.0 13.0 10.0 10000 4000 ꢂ4
3300 pF 6.0 12.0 13.0 10.0 10000 4000 ꢂ4
3900 pF 6.0 12.0 13.0 10.0 10000 4000 ꢂ4
R746F0470--0--
R746F0680--0--
R746F0820--0--
R746F1100--0--
R746F1120--0--
R746F1150--0--
R746F1180--0--
R746F1220--0--
R746F1270--0--
R746F1330--0--
R746F 1390--0--
R746I 1230--0--
R746I 1270--0--
R746I 1390--0--
R746I 1470--0--
R746I 1680--0--
R746I 2120--0--
R746I 2150--0--
R746I 2180--0--
2300 pF 4.0 10.0 18.0 15.0
2700 pF 4.0 10.0 18.0 15.0
3900 pF 5.0 11.0 18.0 15.0
4700 pF 5.0 11.0 18.0 15.0
6800 pF 6.0 12.0 18.0 15.0
0.012 µF 8.5 14.5 18.0 15.0
0.015 µF 8.5 14.5 18.0 15.0
0.018 µF 10.0 16.0 18.0 15.0
9500 3800 ꢂ4
9500 3800 ꢂ4
9500 3800 ꢂ4
9500 3800 ꢂ4
9500 3800 ꢂ4
9500 3800 ꢂ4
9500 3800 ꢂ4
9500 3800 ꢂ4
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%)
All dimensions are in mm.
Note: If the working voltage (V) is lower than the rated voltage
(VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V.
The pulse characteristic K0 depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table.
The dv/dt test is carried out at 2 times the above
values.
09/2008
97