Datasheet > R1191L080B-TR

R1191L080B-TR

更新时间： 2022-12-29 20:54:58

品牌	Logo	应用领域
理光 - RICOH		/
页数	文件大小	规格书
33页	3392K
描述
Supply Current Typ. 50uA (Fast Mode)

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

R1191L080B-TR 数据手册

R1191x

TECHNICAL NOTES

When using these ICs, consider the following points:

• Phase Compensation

In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For

this purpose, use a capacitor C2 with good frequency characteristics and ESR (Equivalent Series Resistance).

(Note: If additional ceramic capacitors are connected with parallel to the output pin with an output capacitor for

phase compensation, the operation might be unstable. Because of this, test these ICs with as same external

components as ones to be used on the PCB.)

• PCB Layout

Make VDD and GND lines sufficient. If their impedance is high, noise pickup or unstable operation may result.

Connect a capacitor C1 with a capacitance value as much as 2.2μF or more between VDD and GND pin, and as

close as possible to the pins.

Set external components, especially the capacitor C2, as close as possible to the ICs, and make wiring as

short as possible.

• Thermal Shutdown Function

There is the built-in thermal-shutdown function in R1191x series. It discontinues operation of the IC when the

junction temperature becomes over 150°C (Typ.) and IC re-operates when the junction temperature under

130°C (Typ.). If the temperature increasing keeps the IC repeats ON and OFF operating. The output becomes

the pulse condition.

• Chip Enable (CE) Circuit and High-speed/ Low Supply Current Switching (ECO) Circuit

To maintain the stability of the output voltage, please do not use the intermediate electric potentials (the

voltage values between V^CEHand VCEL) for the CE pin and the ECO pin. The use of the intermediate electric

potentials increases the supply current and causes the unstable output voltage.

• Auto-discharge Function

R1191xxxxD has adopted Auto-discharge function, which decreases the output voltage quickly to 0V by

turning on the transistor between V^OUTpin and GND pin when switching “Active” to “Standby” and releases the

electrical charges accumulated in the external capacitor.

1...4 5 678 9 10...33

下载PDF

型号	品牌	描述	获取价格	数据表
R1191L080D-TR	RICOH	Supply Current Typ. 50uA (Fast Mode)	获取价格
R1191L100B-TR	RICOH	Supply Current Typ. 50uA (Fast Mode)	获取价格
R1191L100D-TR	RICOH	Supply Current Typ. 50uA (Fast Mode)	获取价格
R1191L101B-TR	RICOH	Fixed Positive LDO Regulator, 10.1V, 1V Dropout, PDSO6, 1.60 X 1.60 MM, HALOGEN FREE AND R	获取价格
R1191L102B-TR	RICOH	Fixed Positive LDO Regulator, 10.2V, 1V Dropout, PDSO6, 1.60 X 1.60 MM, HALOGEN FREE AND R	获取价格
R1191L102D-TR	RICOH	Fixed Positive LDO Regulator, 10.2V, 1V Dropout, PDSO6, 1.60 X 1.60 MM, HALOGEN FREE AND R	获取价格