Datasheet > QM48T45010-PDATG

QM48T45010-PDATG

更新时间： 2024-01-24 15:35:55

品牌	Logo	应用领域
BEL		/
页数	文件大小	规格书
37页	644K
描述
DC-DC Regulated Power Supply Module, 1 Output, Hybrid,

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

QM48T45010-PDATG 技术参数

是否Rohs认证：	符合	生命周期：	Active
包装说明：	,	Reach Compliance Code：	compliant
ECCN代码：	EAR99	风险等级：	5.73
Is Samacsys：	N	模拟集成电路 - 其他类型：	DC-DC REGULATED POWER SUPPLY MODULE
最大输入电压：	75 V	最小输入电压：	36 V
标称输入电压：	48 V	JESD-30 代码：	R-XDMA-P8
功能数量：	1	输出次数：	1
端子数量：	8	最大输出电压：	1.1 V
最小输出电压：	0.9 V	标称输出电压：	1 V
封装主体材料：	UNSPECIFIED	封装形状：	RECTANGULAR
封装形式：	MICROELECTRONIC ASSEMBLY	峰值回流温度（摄氏度）：	NOT SPECIFIED
认证状态：	Not Qualified	表面贴装：	NO
技术：	HYBRID	端子形式：	PIN/PEG
端子位置：	DUAL	处于峰值回流温度下的最长时间：	NOT SPECIFIED
微调/可调输出：	YES	Base Number Matches：	1

QM48T45010-PDATG 数据手册

QM48 Series - 45A

Data Sheet

Trimming/sensing beyond 110% of the rated output voltage

is not an acceptable design practice, as this condition could

cause unwanted triggering of the output over-voltage protec-

tion (OVP) circuit. The designer should ensure that the dif-

ference between the voltages across the converter’s output

pins and its sense pins does not exceed 10% of V_OUT(NOM),

or:

Over-Temperature Protection (OTP)

The converter will shut down under an over-temperature

condition to protect itself from overheating caused by opera-

tion outside the thermal derating curves, or operation in ab-

normal conditions such as system fan failure. After the con-

verter has cooled to a safe operating temperature, it will

automatically restart.

[VOUT(+) − VOUT(−)]−[VSENSE(+) − VSENSE(−)] ≤ VO - NOM X10% [V]

Safety Requirements

This equation is applicable for any condition of output sens-

ing and/or output trim.

The converters meet North American and International

safety regulatory requirements per UL60950 and EN60950

(pending). Basic Insulation is provided between input and

output.

Protection Features

To comply with safety agencies requirements, an input line

fuse must be used external to the converter. The Table be-

low provides the recommended fuse rating for use with this

family of products.

Input Under-Voltage Lockout

Input under-voltage lockout is standard with this converter.

The converter will shut down when the input voltage drops

below a pre-determined voltage.

The input voltage must be at least 35 V for the converter to

turn on. Once the converter has been turned on, it will shut

off when the input voltage drops below 31 V. This feature is

beneficial in preventing deep discharging of batteries used in

telecom applications.

Output Voltage

3.3 V

Fuse Rating

10-A

2.5 V

2.0 -1.5 V

1.2 - 1.0 V

7-A

5-A

3-A

Modules are UL approved for maximum fuse rating of 15-A.

To protect a group of modules with a single fuse, the rating

can be increased from the recommended values above.

Output Over-Current Protection (OCP)

The converter is protected against over-current or short cir-

cuit conditions. Upon sensing an over-current condition, the

converter will switch to constant current operation and

thereby begin to reduce output voltage. When the output

voltage drops below 60% of the nominal value of output volt-

age, the converter will shut down.

Electromagnetic Compatibility (EMC)

EMC requirements must be met at the end-product system

level, as no specific standards dedicated to EMC character-

istics of board mounted component dc-dc converters exist.

However, di/dt tests its converters to several system level

standards, primary of which is the more stringent EN55022,

Information technology equipment - Radio disturbance char-

acteristics - Limits and methods of measurement.

Once the converter has shut down, it will attempt to restart

nominally every 100 ms with a typical 1-2% duty cycle. The

attempted restart will continue indefinitely until the overload

or short circuit conditions are removed or the output voltage

rises above 60% of its nominal value.

Effective internal LC differential filter significantly reduces

input reflected ripple current, and improves EMC.

Output Over-Voltage Protection (OVP)

With the addition of a simple external filter, all versions of the

QmaX™ Series of converters pass the requirements of

Class B conducted emissions per EN55022 and FCC, and

meet at a minimum, Class A radiated emissions per EN

55022 and Class B per FCC Title 47CFR, Part 15-J. Please

contact di/dt Applications Engineering for details of this test-

ing.

The converter will shut down if the output voltage across

Vout(+) (Pin 8) and Vout(-) (Pin 4) exceeds the threshold of

the OVP circuitry. The OVP circuitry contains its own refer-

ence, independent of the output voltage regulation loop.

Once the converter has shut down, it will attempt to restart

every 100 ms until the OVP condition is removed.

QM48T45 Family DS Ver 3 03-27-03

USA Toll Free 866 WOW-didt

Page 5 of 37

1 2 3 456 7 8...37

下载PDF

与QM48T45010-PDATG相关器件

型号	品牌	描述	获取价格	数据表
QM48T45010-PDBTG	BEL	DC-DC Regulated Power Supply Module, 1 Output, Hybrid	获取价格
QM48T45010-PDCPG	BEL	DC-DC Regulated Power Supply Module, 1 Output, 45W, Hybrid, ROHS COMPLIANT, QUARTER BRICK	获取价格
QM48T45012-NAAP	BEL	DC-DC Regulated Power Supply Module, 1 Output, 54W, Hybrid, QUARTER BRICK PACKAGE-8	获取价格
QM48T45012-NAAPG	BEL	DC-DC Regulated Power Supply Module, 1 Output, 54W, Hybrid, ROHS COMPLIANT, QUARTER BRICK	获取价格
QM48T45012-NAAT	BEL	DC-DC Regulated Power Supply Module, 1 Output, Hybrid	获取价格
QM48T45012-NABP	BEL	DC-DC Regulated Power Supply Module, 1 Output, 54W, Hybrid, QUARTER BRICK PACKAGE-8	获取价格

与QM48T45010-PDATG相关文章

STM32H743技术深度剖析与应用案例探索
2024-05-30

15
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
2024-05-30

15
74HC14芯片资料介绍：性能特性分析、引脚介绍
2024-05-30

13
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
2024-05-30

10

产品中心

服务支持

精选活动

关于我们

帮助中心

QM48T45010-PDATG

QM48T45010-PDATG 技术参数

QM48T45010-PDATG 数据手册

与QM48T45010-PDATG相关器件

与QM48T45010-PDATG相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

QM48T45010-PDATG

QM48T45010-PDATG 技术参数

QM48T45010-PDATG 数据手册

与QM48T45010-PDATG相关器件

与QM48T45010-PDATG相关文章

您还可以找

您在本页遇到什么问题？