Q45X Series Sensors
Photoelectric sensors with expansion slot for field upgrades
Low cost photoelectric sensors with unique expansion slot to
allow instant sensor upgrading at any time*
•
Expansion cards for data bus network interfaces and sensor
performance displays
•
Basic sensor directly interfaces to PLCs, relays, and other logic-
level loads
•
Easy "smart sensor" interfacing to any data bus network by
•
simply selecting the appropriate plug-in card and cable for
popular bus protocols, including DeviceNet™, SDS™, Seriplex™,
ASI™, LON™, and others.
Q45X Series diffuse
mode sensor shown.
At lower right,
10 to 30V dc operation;
integral mini-style quick-disconnect (QD) connector
•
a plug-in expansion card.
Highly-visible sensor status and performance LEDs
•
•
Tough mechanical design withstands 1200 psi washdown
*Patent pending
Description
Q45X Series sensors are self-contained dc photoelectric devices designed The Q45X is a 10 to 30V dc sensor with impressive
for reliable sensing in industrial environments. A unique design allows optical performance. Output of the basic sensor (i. e.
the user to instantly customize the basic sensor with the addition of one of without a bus card) is bipolar: one sourcing (PNP)
many optional expansion cards.
and one sinking (NPN) solid-state device. Both
outputs have 250 mA capacity, and may be used
simultaneously. Outputs are converted from light
operate (normally open) to dark operate (normally
closed) via a switch located under the hinged top
cover. This basic output configuration provides a
direct interface to a PLC or to any "smart drop" on a
bus system (see page 5).
Expansion cards will be available for conversion of the basic sensor to
nearly any data bus system protocol. Sensors are easily converted to bus-
compatible devices by simply raising the hinged top cover and plugging
the appropriate bus card into the expansion slot. Bus system expansion
cards are currently planned for DeviceNet™, SDS™, Seriplex™, ASI™,
LON™, and others.
With the bus card installed in the Q45X, "smart drop" junction boxes are
not required. Sensor wiring is accomplished using simple "dumb drop"
junction boxes or "T" connectors. If the bus protocol is ever changed, the
Q45X Series sensors on the network can be quickly converted by simply
inserting a different bus card. Sensors are reconfigured without disturbing
mounting or alignment.
StandardQ45Xfeaturesinclude three highly-visible
sensor status indicator LEDs for power, signal, and
output state. ThePOWER LED flashes to indicate an
overload or short circuit of either output. The
SIGNAL LED incorporatesBanner’spatentedAlign-
ment Indicating Device (AID™) circuitry which
pulses the indicator at a rate which is proportional to
the received light signal strength. A slow flash rate
alerts personnel to a marginal signal due to sensor
misalignment or dirt on the lenses.
The expansion slot also allows numerous advanced sensor features to be
addedtothebasicQ45X,includingsensordiagnosticsanddigitalbargraph
displays. In addition, other advanced functions can be developed to meet
specific customer requirements.
Q45X sensors are available for the nine sensing
modes listed in the table (left). All models boast o-
ring sealing which exceeds the NEMA 6P (IP67)
rating. The Q45X is designed to withstand wash-
downs to 1200 psi. Q45Xs are extremely rugged, with
VALOX® housingsandmoldedacryliclenses. Mini-
style quick disconnect (QD) fittings are standard,
and allow the user to choose mating 5-wire cable to
exactly fit the interfacing requirements (see pages 5
and 6).
Model No. Part No. Sensing Mode
Beam
Sensing Range
Q45X6EQ
Q45XB6RQ
37879
37880
Opposed emitter
Opposed receiver
Infrared,
880 nm
200 feet
(60 m)
Q45XB6LVQ 37881
Q45XB6LPQ 37882
Retroreflective
Polarized retro
Vis. red, 680 nm
Vis. red, 680 nm
30 ft. (9 m)
20 ft. (6 m)
Q45XB6DQ
37883
Short-range diffuse Infrared, 880 nm
Long-range diffuse Infrared, 880 nm
18 in. (45 cm)
6 ft. (1,8 m)
1.5 in. (38 mm)
4 in. (100 mm)
(see page 4)
(see page 4)
Q45XB6DLQ 37884
Q45XB6CVQ 37885
Q45XB6CV4Q 37886
Convergent
Vis. red, 680 nm
Vis. red, 680 nm
Infrared, 880 nm
Vis. red, 660 nm
Convergent
Q45XB6FQ
Q45XB6FPQ 37888
37887
Glass fiber optic
Plastic fiber optic
VALOX® and Lexan® are registered trademarks of General Electric Co.
Alignment Indicating Device system (AID™), US patent no. 4356393
Printed in USA
P/N 37735G5A
5秒后页面跳转
深入解析CS8416引脚说明、参数、技术特点
TPA3116D2功放芯片参数详解、引脚说明
移位寄存器74HC165引脚说明、驱动程序示例解读
深入解析AD9833：DDS频率合成器的卓越性能与广泛应用
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
替代型号
如果您发现信息不准确，
