Q22 Series
Product Specifications
High Power LED Driver
ANZ#: Z220d, Sep. 19, 2014
Total Power
25 Watts max.
Input Voltages
110 ~ 277VAC
Number of Outputs One
SPECIAL FEATURES
Universal Input range from 100VAC~304VAC, 50/60Hz
Versatile mechanical design maximizes design flexibility.
Form-factor: Available in metal and plastic
Fully potted, suitable for dry and damp location applications
4 in 1 Dimming Control plus “ENABLE” input
UL8750 and CE compliant
Wide selection of pre-adjusted C/C outputs (factory setting)
ENVIRONMENTAL
Operating temperature:
Storage temperature:
-40 to +50 ⁰ C, Tc: 85 ⁰ C
-40 to +85 ⁰ C
5% to 95%
Convection
5 to 50 Hz
Humidity (Non-Condensing):
Cooling:
Vibration Frequency:
MTBF:
>100,000 Hours at full load and 25ºC ambient conditions
(TELC3 – Telcordia SR-332, Issue 3)
Picture shown above is not to scale
Frequency : 47 to 63Hz
SPECIFICATIONS :
Input Range : 100 ~ 277VAC
⁰
Power Factor: > 0.92 at 65% to 100% load, 115VAC or 230VAC
Input Current : 0.3 Amps max. at 115VAC
Output Current Regulation : ±3%
Inrush Current : 2.0 Amps max. at 115VAC, cold start 25 C
Efficiency : 87% Typical
Maximum Power : 25W (Constant Voltage)
Leakage Current : 50uA typ.
Protection : OCP, SCP, OLP – Auto Recovery
Control : 0-10V dimmer; PWM (250-3KHz); Potentiometer; Enable
Hold up time: Half cycle min. at 120VAC and 80% rated load
MODEL SELECTION :
Dimension: refer to mechanical applications
Regulation Compliance: UL8750 or EN61347, EN55015, EN61547
Constant Voltage Mode
Constant Current Mode
Model Number
Model Number
V (DC)
12, ±5%
24, ±5%
36, ±5%
48, ±5%
A (mA)
2080
1040
700
Max. W
A (mA)
2500 ~ 1200
1250 ~ 6000
1000 ~ 475
825 ~ 400
700 ~ 350
620 ~ 300
550 ~ 250
V (DC)
6 ~ 12
Max. W
Q22-U12-XP
Q22-U24-XP
Q22-U36-XP
25
25
25
25
Q22-U12-Cyyyy-Xz
Q22-U24-Cyyyy-Xz
Q22-U30-Cyyyy-Xz
Q22-U36-Cyyyy-Xz
Q22-U42-Cyyyy-Xz
Q22-U48-Cyyyy-Xz
Q22-U54-Cyyyy-Xz
22
22
22
22
22
22
22
14 ~ 24
19 ~ 30
23 ~ 36
27 ~ 42
30 ~ 48
34 ~ 54
Q22-U48-XP
Notes: yyyy = Output current
520
“z” = P for plastic enclosure
M for metal enclosure
T for plastic enclosure with terminal blocks
Dimming Wiring Diagram
10K ohm (min)
potentiometer
PWM Controller
DIMMER
(sourcing)
DIMMER
(sinking)
PWM
(250Hz~2KHz)
Maximum
current
output:
Typically
6mA.
Maximum current
required: 1mA max
per LF1048 driver.
(-)
(+)
(-)
(+)
(-)
(+)
NC/CAP
NC/CAP
+10V OUT
+10V OUT
(YELLOW)
(YELLOW)
+V out
(RED)
+V out
(RED)
+V out
(RED)
+V out
(RED)
LED Driver
LED Driver
LED Driver
LED Driver
-V out
(BLACK)
-V out
(BLACK)
-V out
(BLACK)
-V out
(BLACK)
1 of 2
www.magtechind.com Tel: 702‐364‐9998