PSSEU60 SERIES
Rev A
Wall Industries, Inc.
Up to 63 Watts, AC/DC Switching Power Supplies
FEATURES
• Class I
• Output Voltage Available from 3VDC to 50VDC
• Single to Quad Outputs
• RoHS Compliant
• Internal EMI Filter
• Over Voltage Protection (Crowbar Design)
• Input Surge Current, Over Voltage, and Over Load Protection
• 3-Pin Input Connector
• Up to 63 Watts Output Power
• 2-Pin Input Connector Available (See PSSEU61 Series)
• Meets FCC Part-15 Class B and CISPR-22 Class B Emission Limits
• UL/cUL(UL 60950-1:2nd Edition) Safety Approvals
• 100% Burn-in Tested
• Wide Input Voltage Range: 90~264VAC, 47~63Hz
DESCRIPTION
The PSSEU60 series of Class I AC/DC switching mode power supplies provides up to 63 Watts of continuous output
power in a 5.43” x 3.43” x 1.76” enclosed package. This series has single, dual, triple, and quad output models with a
wide input voltage range of 90~264VAC. These power supplies have an internal EMI filter and are protected against
over load, over voltage, and input surge current conditions. This series also has UL/cUL (UL 60950-1: 2nd edition) safety
approvals and meets FCC Part-15 class B and CISPR-22 Class B emission limits. These units are well suited for use in
industrial equipment as well as many other applications. All models are 100% burn-in tested.
Size:
5.43 x 3.43 x 1.76 inches
138.0 x 87.0 x 44.6 mm
Weight:
1.1 lbs (500g)
TECHNICAL SPECIFICATIONS: PSSEU60 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
TEST CONDITIONS
Min
Typ
Max
Unit
Safety Approvals Input Voltage Range
Operating Input Voltage Range
100
90
240
264
63
Input Voltage
Input Frequency
Input Current
VAC
Hz
A
47
100VAC, full load
1.6
1.0
240VAC, full load
115VAC, full load, 25°C, cold start
230VAC, full load, 25°C, cold start
33
65
5
Inrush Current
A
Single Output Models
No Load Power Consumption
230VAC, no load
W
Dual, Triple, & Quad Output Models
5.5
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Line Regulation
Load Regulation
Output Power
LL to HL, full load
230VAC
0.5
3
1
7
%
%
W
63
Output Current
See Table
Outputs under 3.3VDC
Others
2
1
Ripple & Noise (peak to peak)
90VAC, full load
%
Hold-up Time
Start-up Time
110VAC, full load
100VAC, full load
100VAC, Full load to half load
0~50°C
12
ms
s
2
4
Transient Response Time
Temperature Coefficient
PROTECTION
ms
%/°C
-0.04
+0.04
Over Voltage Protection
Over Current Protection
GENERAL SPECIFICATIONS
Efficiency
112
110
132
150
%
%
230VAC, full load
Primary to Secondary
Primary to PE
70
4242
2506
50
88
%
Dielectric Withstanding Voltage
VDC
Isolation Resistance
Leakage Current
Test Voltage = 500VDC
240VAC/60Hz
MΩ
mA
0.75
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Derating linearly from 100% Load at 25°C to 50% load at 70°C
0
-40
0
+70
+85
95
°C
°C
%
%
0
95
Cooling
MTBF
Free air convection
MIL-HDBK-217F, 25°C
100,000
hours
PHYSICAL SPECIFICATIONS
Weight
1.1 lbs (500g)
5.43 x 3.43 x 1.76 inches (138.0 x 87.0 x 44.6 mm)
See mechanical drawing
Dimensions (L x W x H)
Input Connector
Output Connector
SAFETY & EMC
Safety Approvals
See mechanical drawing
UL/cUL (UL 60950-1: 2nd edition)
EMI Requirements for CISPR-22
EMI Requirements for FCC PART-15
220VAC
110VAC
B
B
Class
Class
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
12/19/2013
Page 1 of 4