5秒后页面跳转
PG0926.102NL PDF预览

PG0926.102NL

更新时间: 2024-09-27 22:49:55
品牌 Logo 应用领域
普思电子 - PULSE 电感器
页数 文件大小 规格书
3页 393K
描述
FIXED IND 1UH 30A 1.2 MOHM SMD

PG0926.102NL 技术参数

是否Rohs认证: 符合生命周期:Active
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8504.50.80.00风险等级:2.25
电感器类型:GENERAL PURPOSE INDUCTORBase Number Matches:1

PG0926.102NL 数据手册

 浏览型号PG0926.102NL的Datasheet PDF文件第2页浏览型号PG0926.102NL的Datasheet PDF文件第3页 
SMT Power Inductor  
Round Wire Coils - PG0926NL series  
Inductance Range: 0.46µH to 22.0µH  
Current Rating: up to 50Apk  
Footprint: 13.4mm x 13.4mm Max  
Height: 8.0mm Max  
No Thermal Aging  
Electrical Specifications @ 25°C - Operating Temperature -40°C to 130°C¹  
CONTROLLED ELECTRICAL SPECS  
SATURATION5  
CURRENT Isat  
(A TYP)  
Inductance  
@ Irated²  
Irated ³  
HEATING6 CORE LOSS7  
CURRENT Idc FACTOR  
Part Number  
(A)  
µH TYPICAL  
DCR4  
(mΩ)  
±12%  
INDUCTANCE  
@0Adc  
(µ ±20%)  
(A TYP)  
(K2)  
25°C  
100°C  
40  
27  
21  
PG0926.461NL  
PG0926.102NL  
PG0926.182NL  
PG0926.282NL  
PG0926.562NL  
PG0926.722NL  
PG0926.872NL  
PG0926.113NL  
PG0926.153NL  
PG0926.223NL  
0.42  
0.94  
1.7  
44  
30  
22  
19  
14  
12  
11  
0.55  
1.2  
0.46  
1.00  
50  
34  
44  
30  
22  
19  
32.9  
47.6  
2.2  
2.9  
4.1  
1.80  
25  
64.3  
80.0  
114.3  
128.6  
138.1  
157.1  
2.6  
5.0  
6.8  
2.80  
5.60  
7. 20  
20  
14  
16  
11.5  
10  
9
14.5  
12  
7.0  
12.5  
11.5  
10.5  
9
8.4  
10.6  
13.5  
20  
8.0  
12.0  
12.5  
21.0  
8.70  
11.50  
15.00  
22.00  
11  
9.5  
8
8
9.5  
8
7
194.8  
224.5  
7
7.5  
6
7
Notes:  
1. Actual temperature of the component during system operation (ambient plus  
temperature rise) must be within the standard operating range.  
rise of the component during system operation.  
Core loss approximation is based on published core data:  
Core Loss = K1 * (f)1.72 * (K2ΔI)2.41in mW  
K1 = 8.68E - 10  
7.  
2. Inductance at Irated is a typical inductance value for the component taken at rated  
current.  
3. The rated current listed is either the saturation current (@ 25°C) or the heating cur-  
rent depending on which value is lower.  
f = switching frequency in KHz  
K1 & K2 = core loss factors  
4. The DCR of the part is measured at an ambient temperature of 20°C ± ± °from  
point a to b as shown below on the mechanical drawing.  
ΔI = delta I across the component in Ampere  
K2ΔI = one half of the peak to peak flux density across the component in Gauss  
5. The saturation current, Isat, is the current at which the component inductance drop  
by 20% (typical) at an ambient temperature. This current is determined by placing  
the component in the specified ambient environment and applying a short duration  
pulse current (to eliminate self-heating effect) to the component.  
6. The heating current, Idc, is the DC current required to raise the component tempera-  
ture by approximately 40°C. The heating current is determined by mounting the  
component on a typical PCB and applying current for 30 minutes. The temperature is  
measured by placing the thermocouple on top of the unit under test. Take note that  
the components’ performance varires depending on the system condition. It is sug-  
gested that the component be tested at the system level, to verify the temperature  
8. Unless otherwise specified, all testing is made at 100KHz, 0.1Vac  
9. Optional Tape and Reel packaging can be ordered by adding a “T” suffix to the part  
number (i.e. PG0926.223NL becomes PG0926.223NLT). Pulse complies with industry  
standard tape and reel specification EIA481. The tape and reel for this product has a  
width (W=32.0mm), pitch (Po=20.0mm) and depth (Ko=8.35mm).  
10. The core is a conductive material so care should be taken when mounting this com-  
ponent over an exposed via or if the voltage across the terminals exceeds 24V. Trickle  
current through the core material may generate additional losses and potential  
overheating. Please contact Pulse to discuss an alternative solution if required.  
http://www.power.pulseelectronics.com/contact  
power.pulseelectronics.com  
P700.D (01/19)  

与PG0926.102NL相关器件

型号 品牌 获取价格 描述 数据表
PG0926.102NLT PULSE

获取价格

FIXED IND 1UH 30A 1.2 MOHM SMD
PG0926.113NL PULSE

获取价格

FIXED IND 11.5UH 9.5A 12 MOHM
PG0926.153NL PULSE

获取价格

Round Wire Coils
PG0926.153NLT PULSE

获取价格

FIXED IND 15UH 8A 12.5 MOHM SMD
PG0926.182NL PULSE

获取价格

FIXED IND 1.8UH 22A 2.2 MOHM SMD
PG0926.182NLT PULSE

获取价格

FIXED IND 1.8UH 22A 2.2 MOHM SMD
PG0926.223NL PULSE

获取价格

Round Wire Coils
PG0926.223NLT PULSE

获取价格

FIXED IND 22UH 7A 21 MOHM SMD
PG0926.282NL PULSE

获取价格

FIXED IND 2.8UH 19A 2.9 MOHM SMD
PG0926.282NLT PULSE

获取价格

FIXED IND 2.8UH 19A 2.9 MOHM SMD