2
PET2000-12-074xA
PET
2000
-
12
-
074
x
A
Product Family
Power Level
Dash
V1 Output
Dash
Width
Airflow
Input
AC Inlet1
Blank: C14
C: C16
A: Saf-D-Grid®
N: Normal
R: Reverse
PET Front-Ends
2000 W
12 V
74 mm
A: AC
The PET2000-12-074xA AC/DC power supply is a fully DSP controlled, highly efficient front-end power supply. It incorporates
resonance-soft-switching technology to reduce component stresses, providing increased system reliability and very high efficiency.
With a wide input operational voltage range the PET2000-12-074xA maximizes power availability in demanding server, network, and
other high availability applications. The supply is fan cooled and ideally suited for integration with a matching airflow path.
The PFC stage is digitally controlled using a state-of-the-art digital signal processing algorithm to guarantee best efficiency and
unity power factor over a wide operating range.
The DC/DC stage uses soft switching resonant techniques in conjunction with synchronous rectification. An active OR-ing device
on the output ensures no reverse load current and renders the supply ideally suited for operation in redundant power systems.
The always-on standby output provides power to external power distribution and management controllers. It is protected with an
active OR-ing device for maximum reliability.
Status information is provided with a front-panel LED. In addition, the power supply can be controlled and the fan speed set via the
I2C bus. The I2C bus allows full monitoring of the supply, including input and output voltage, current, power, and inside temperatures.
Cooling is managed by a fan controlled by the DSP controller. The fan speed is adjusted automatically depending on the actual
power demand and supply temperature and can be overridden through the I2C bus.
L
V1
DC
Curr
ent
limit
VSB
Filter
PFC
DC
N
GND
PE
Aux
Converter
EEPROM
Fan
V1_SENSE
V1_SENSE_RTN
ISHARE
Digital
Primary
Controls
Digital
Secondary
Controls
Communication Bus
I2C
A2..0
Logic Signals
Figure 1. PET2000-12-074xA Block Diagram
Stresses in excess of the absolute maximum ratings may cause performance degradation, adversely affect long-term reliability and
cause permanent damage to the supply.
PARAMETER
Vi maxc Maximum Input
CONDITIONS / DESCRIPTION
MIN
MAX
UNITS
Continuous
264
VAC
1 C14 = IEC 60320-C14 type, C16 = IEC 60320-C16 type, Saf-D-Grid® = Anderson Saf-D-Grid®
tech.support@psbel.com