5秒后页面跳转
P5KE9.0E3 PDF预览

P5KE9.0E3

更新时间: 2024-11-19 14:28:19
品牌 Logo 应用领域
美高森美 - MICROSEMI 局域网二极管
页数 文件大小 规格书
4页 187K
描述
Trans Voltage Suppressor Diode, 500W, 9V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AL, ROHS COMPLIANT, PLASTIC, DO-41, 2 PIN

P5KE9.0E3 技术参数

是否Rohs认证: 符合生命周期:Obsolete
零件包装代码:DO-41包装说明:O-PALF-W2
针数:2Reach Compliance Code:compliant
ECCN代码:EAR99HTS代码:8541.10.00.50
风险等级:5.72最大击穿电压:12.2 V
最小击穿电压:10 V击穿电压标称值:11.1 V
外壳连接:ISOLATED最大钳位电压:16.9 V
配置:SINGLE二极管元件材料:SILICON
二极管类型:TRANS VOLTAGE SUPPRESSOR DIODEJEDEC-95代码:DO-204AL
JESD-30 代码:O-PALF-W2JESD-609代码:e3
湿度敏感等级:1最大非重复峰值反向功率耗散:500 W
元件数量:1端子数量:2
封装主体材料:PLASTIC/EPOXY封装形状:ROUND
封装形式:LONG FORM峰值回流温度(摄氏度):NOT SPECIFIED
极性:UNIDIRECTIONAL最大功率耗散:1.19 W
认证状态:Not Qualified最大重复峰值反向电压:9 V
子类别:Transient Suppressors表面贴装:NO
技术:AVALANCHE端子面层:MATTE TIN
端子形式:WIRE端子位置:AXIAL
处于峰值回流温度下的最长时间:NOT SPECIFIEDBase Number Matches:1

P5KE9.0E3 数据手册

 浏览型号P5KE9.0E3的Datasheet PDF文件第2页浏览型号P5KE9.0E3的Datasheet PDF文件第3页浏览型号P5KE9.0E3的Datasheet PDF文件第4页 
P5KE5.0 thru P5KE170CA, e3  
500 W TRANSIENT VOLTAGE  
SUPPRESSOR  
S C O T T S D A L E D I V I S I O N  
DESCRIPTION  
APPEARANCE  
This P5KE series is an economical 500 W Transient Voltage Suppressor  
(TVS) for protecting voltage-sensitive components from destruction or  
DO-41  
(DO-204AL)  
degradation.  
It is available in both unidirectional and bi-directional  
configurations as well as RoHS Compliant (annealed matte-Tin Finish) with  
an e3 suffix added to the part number. The response time of their clamping  
action is virtually instantaneous. As a result, they may also be used  
effectively for protection from ESD or EFT per IEC61000-4-2 and IEC61000-  
4-4 or for inductive switching environments and induced RF. They can also  
be used for protecting other sensitive components from secondary lightning  
effects per IEC61000-4-5 and class levels defined herein. Microsemi also  
offers numerous other TVS products to meet higher and lower power  
demands and special applications.  
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com  
FEATURES  
APPLICATIONS / BENEFITS  
Available in both unidirectional and bidirectional  
(add C or CA suffix to part number for bidirectional)  
Suppresses transients up to 500 watts @ 10/1000 µs  
Protects sensitive components such as IC’s,  
CMOS, Bipolar, BiCMOS, ECL, DTL, T2L, etc.  
Selections for 5.0 to 170 V standoff voltage (VWM  
Economical series for thru-hole mounting  
Similar to SA5.0 thru SA170 series  
)
Optional 100% screening for avionics grade is  
available by adding MA prefix to part number for added  
100% temperature cycle -55oC to +125oC (10X) as well  
as surge (3X) and 24 hours HTRB with post test VZ &  
IR (in the operating direction for unidirectional or both  
directions for bidirectional)  
Protection from switching transients & induced RF  
Fast response  
Compliant to IEC61000-4-2 and IEC61000-4-4 for  
ESD and EFT protection respectively  
Options for screening in accordance with MIL-PRF-  
19500 for JAN, JANTX, JANTXV, and JANS are also  
available by adding MQ, MX, MV, or MSP prefixes  
respectively to part numbers.  
Secondary lightning protection per IEC61000-4-5  
with 42 Ohms source impedance:  
Class 1: P5KE5.0 to P5KE120A or CA  
Class 2: P5KE5.0 to P5KE60A or CA  
Class 3: P5KE5.0 to P5KE30A or CA  
Class 4: P5KE5.0 to P5KE15A or CA  
Surface mount equivalents available as SMAJ5.0 to  
SMAJ170CA (consult factory for other surface mount  
options)  
Moisture classification is Level 1 with no dry pack  
required per IPC/JEDEC J-STD-020B  
Secondary lightning protection per IEC61000-4-5  
with 12 Ohms source impedance:  
RoHS Compliant devices available by adding “e3” suffix  
Class 1: P5KE5.0 to P5KE36A or CA  
Class 2: P5KE5.0 to P5KE18A or CA  
MAXIMUM RATINGS  
MECHANICAL AND PACKAGING  
Operating and Storage Temperature: -65°C to +150°C  
Void-free transfer molded thermosetting epoxy body  
meeting UL94V-0  
Peak Pulse Power: 500 Watts at 10/1000 μs (see Figure  
FINISH: Tin-Lead or RoHS Compliant annealed  
matte-Tin plating readily solderable per MIL-STD-  
750, method 2026  
1, 2 and 3 for tW, waveform and derating effects)  
Impulse repetition rate (duty factor): 0.01%  
Thermal Resistance: 45°C/W junction to leads @ 3/8  
inch (10 mm) from body, or 105°C/W junction to ambient  
when mounted on FR4 PC board with 4 mm2 copper  
pads (1 oz) and track width 1 mm, length 25 mm  
MARKING: Body marked with part number  
POLARITY: Band denotes cathode. Bidirectional  
not marked  
WEIGHT: 0.3 grams (approximate)  
Steady-State Power: 2.77 Watts @ TL=25°C at 3/8 inch  
(10 mm) from body, or 1.19 W at TA = 25ºC on FR4 PC  
board described for thermal resistance  
TAPE & REEL option: Standard per EIA-296 (add  
“TR” suffix to part number)  
Forward Voltage at 25°C: 3.5 V @ 30 A with 8.3 ms  
See package dimensions on last page  
half-sine wave (unidirectional only)  
Solder temperatures: 260 °C for 10 s (maximum)  
Copyright © 2005  
8-04-2005 REV D  
Microsemi  
Page 1  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  

与P5KE9.0E3相关器件

型号 品牌 获取价格 描述 数据表
P5KE9.0TR MICROSEMI

获取价格

Trans Voltage Suppressor Diode, 500W, 9V V(RWM), Unidirectional, 1 Element, Silicon, DO-20
P5KE90 MICROSEMI

获取价格

5.0 thru 170 volts 500 Watts Transient Voltage Suppressors
P5KE90 MCC

获取价格

500 Watt Transient Voltage Suppressors 5.0 to 170 Volts
P5KE90 DIGITRON

获取价格

Transient Voltage Suppressor, Uni-directional; Max Peak Repetitive Reverse Voltage: 500; M
P5KE90 NJSEMI

获取价格

Diode TVS Single Uni-Dir 90V 500W 2-Pin DO-41
P5KE90A MICROSEMI

获取价格

5.0 thru 170 volts 500 Watts Transient Voltage Suppressors
P5KE90A MCC

获取价格

500 Watt Transient Voltage Suppressors 5.0 to 170 Volts
P5KE90A DIGITRON

获取价格

Transient Voltage Suppressor, Uni-directional; Max Peak Repetitive Reverse Voltage: 500; M
P5KE90A NJSEMI

获取价格

Diode TVS Single Uni-Dir 90V 500W 2-Pin DO-41
P5KE90A-AP MCC

获取价格

Trans Voltage Suppressor Diode, 500W, 90V V(RWM), Unidirectional, 1 Element, Silicon, DO-1