3M™ Pleated Foil I/O Cable Assemblies
MDR Version
Metal Shell with Latches
Contact
Dimension B
Dimension C
Dimension D
.42 [ 10.7 ]
.46 [ 11.7 ]
Metal Backshell with Latching Version
Quantity
20
26
36
40
50
68
1.17 [ 29.7 ]
1.31 [ 33.3 ]
1.57 [ 39.9 ]
1.67 [ 42.4 ]
1.93 [ 49.0 ]
2.37 [ 60.2 ]
1.55 [ 39.4 ]
C
1.50 [ 38.1 ]
1.35 [ 34.3 ]
D
.08
[ 2.0 ]
B
Assembly Tolerances
Length and Tolerance
<36 ″: ±1″
36″ to 120″: ±2″
120″ to 240″: ±4″
Inch
[m m ]
Tolerance U nless N oted
>240″:±6″
.0
.00
.000
Minimum Length:
20-50 Position: 6" [152 mm]
68-100 Position: 8" [203 mm]
inch ±.1
±.01 ±.005
[ ] D im ensions for R eference
O nly
Over Molded or Metal Backshell
withThumbscrews
X
X
X
X
X
X
X
X
68 - 100 position
Metal Backshell with Latches
20 - 68 position
Ordering Information
XX-XXXXXG-XXX-XX-XXX.X
Body Type
OM=Overmold
LS=Metal Shell, Low Crosstalk Connection
MS=Metal Shell, Standard Connection
Length in Inches
Minimum lengths, 6" [152 mm] for 20 - 50
position cables,
and 8" [203 mm] for 68 - 100
position cables
Cable Impedance and Jacket Type
50 Ω
90101= Thick Jacket
90201= Thin Cover
93101= Thick Jacket, Low Skew
75 Ω
90111= Thick Jacket
90211= Thin Cover
Jackscrew
4=4-40 Thread
M=M2.5 Thread
L=Latch
Shim
N=No Shim (Overmold Only)
S=Shim (Overmold Only)
0=Placeholder (metal shell only)
Conductor/
Contact Quantity
( See Table )
TS-0804-08
Sheet 4 of 4
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373