NJG1151MD7
I TERMINAL DESCRIPTION
Pin No.
1
SYMBOL
GND
DESCRIPTION
Ground terminal.
This terminal should be connected to the ground plane as close as possible
for excellent RF performance.
RF signal output terminal of the switch.
2
3
SWOUT1 RF signal is output through the external circuit.
Please connect the DC blocking capacitor of the application circuit.
RF signal input terminal of the switch.
SWIN1 RF signal is input through the external circuit.
Please connect the DC blocking capacitor of the application circuit.
Ground terminal.
4
GND
This terminal should be connected to the ground plane as close as possible
for excellent RF performance.
RF signal output terminal of the switch.
5
SWOUT2 RF signal is output through the external circuit.
Please connect the DC blocking capacitor of the application circuit.
RF signal input terminal of the switch.
6
SWIN2 RF signal is input through the external circuit.
Please connect the DC blocking capacitor of the application circuit.
7
SPLOUT2 RF signal output terminal of the splitter.
Ground terminal.
8
GND
This terminal should be connected to the ground plane as close as possible
for excellent RF performance.
9
SPLOUT1 RF signal output terminal of the splitter.
10
11
SPLIN
GND
RF signal input terminal of the splitter.
Ground terminal.
This terminal should be connected to the ground plane as close as possible
for excellent RF performance.
RF signal output terminal of the LNA.
RF signal is output through the external circuit.
This terminal is also a voltage supply terminal of the switch and LNA,
Please supply the voltage through an inductor of the application circuit.
12
13
14
LNAOUT
GND
Ground terminal.
This terminal should be connected to the ground plane as close as possible
for excellent RF performance.
RF signal input terminal of the LNA.
RF signal is input through the external circuit.
This terminal is also a current adjustment terminal of the LNA,
Please connect to ground via a resistor of the application circuit.
LNAIN
GND
Exposed
Pad
Ground terminal.
- 6 -