NIN Series
Molded Chip Wirewound Inductors
FEATURES
• EIA SIZES A (1210), B (1812) AND C (1008)
• EXCELLENT HIGH Q AND HIGH SRF CHARACTERISTICS
• BOTH FLOW AND REFLOW SOLDERING APPLICABLE
• HIGH INDUCTANCE AVAILABLE IN SMALL SIZE
• SHIELDED TYPE AVAILABLE ON SIZE A (1210) AND C (1008)
• EMBOSSED PLASTIC TAPE PACKAGE FOR AUTOMATIC PICK-PLACE
AVAILABLETYPE AND RANGE
Inductance
Range
EIA Size
Size Code Size (L x W x H mm) NIC Type
Style
Page
NIN-FC
NIN-SC
0.22 ~ 100 µH
27 ~ 100 µH
Standard
Shielded
188
190
1008
C
2.5 x 2.0 x 1.6
NIN-NC
NIN-PC
NIN-FA
NIN-SA
NIN-NA
NIN-PA
NIN-FB
10nH ~ 0.82 µH High Frequency
189
1.0 ~ 33 µH
0.22 ~ 220 µH
10 ~ 270 µH
High Current
Standard
190
191
Shielded
193
1210
1812
A
B
3.2 x 2.5 x 2.2
4.5 x 3.2 x 3.2
47nH ~ 8.2 µH
1.0 ~ 330 µH
0.10 ~ 1000 µH
High Frequency
High Current
Standard
192
193
186,187
SPECIFICATIONS
Case Size
1210
Specifications
1008
1812
Inductance Range
Inductance Tolerance
Operating Temperature Range
Insulation Resistance
10nH ~ 100 µH 47nH ~ 270µH 0.10µH ~ 1000 µH
±20% (M), ±10% (K), ±5% (J)
-40°C ~ +85°C
±10% (K), ±5% (J)
1,000 MegOhm Min. (@ 100Vdc, Termination to Case)
250 Vdc for 1 minute (Termination to Case)
Withstanding Voltage
Q-Factor, Self Resonant Frequency
DC Resistance, Rated DC Current
and Inductance Tolerance
See Individual Product Listings
ENVIRONMENTAL CHARACTERISTICS
Test
Specification
Test Method & Condition
Solderability
90% Min. Coverage
After 3 Sec. Dip in +230oC Solder Pot (Post Flux)
After 500 Hrs at 60oC and 90 ~ 95% RH
After 5 Seconds at -260oC (5 Min. 120oC Pre-Heat)
After 2 Hrs per Axis, 10 ~ 55Hz, 1.5 mm Ampl
After 100 cycles (-40o to +85oC) 30 Min. Each
After 500 Hrs at -40oC
(1) No Evidence of Damage
(2) Inductance Shall Be
Within +5% of initial
Value
(3) Q Factor Shall Be
Within +10 of initial
Value
Humidity
Soldering Effect
Low Frequency Vibration
Thermal Shock
Low Temperature Storage
(1) No Evidence of Damage
High Temperature Load (2) Inductance Shall Be
After 500 Hrs at +85oC with rated DC Current
Life
Within ±10% of Initial
Value
(3) Q Factor Shall Be
Within ±10% of Initial
Value
After 500 Hrs at 60oC with 90 ~ 95% RH
with Rated DC Current
Humidity Load Life
®
NIC COMPONENTS CORPORATION
70 Maxess Rd., Melville, NY 11747 • (516)396-7500 FAX (516)396-7575