Full-Featured E Series Multifunction DAQ
12 or 16-Bit, up to 1.25 MS/s, up to 64 Analog Inputs
NI MITE – ASIC designed to optimize data transfer for multiple High-Performance Driver Engine – Software-timed single-point
simultaneous operations using bus mastering with three scatter- input (typically used in control loops) with NI-DAQ achieves
gather DMA channels for maximum performance of concurrent rates of up to 50 kHz. NI-DAQ also delivers maximum I/O
I/O operations.
system throughput with a multithreaded driver.
NI PGIA – Measurement and instrument class amplifier that Test Panels – With NI-DAQ, you can test all of your device
guarantees settling times at all gains. Typical commercial off-the- functionality before you begin development.
shelf amplifier components do not meet the settling time
requirements for high-gain measurement applications.
Scaled Channels – Easily scale your voltage data into the proper
engineering units using the NI-DAQ Measurement Ready virtual
PFI Lines – Eight programmable function input (PFI) lines that channels by choosing from a list of common sensors and signals or
can be used for software-controlled routing of interboard and creating your own custom scale.
intraboard digital and timing signals.
LabVIEW Integration – All NI-DAQ functions use the waveform data
RTSI or PXI Trigger Bus – Used to share timing and control signals type, which carries acquired data and timing information directly
between devices and synchronize operations.
into more than 400 LabVIEW built-in analysis routines for display of
results in engineering units on a graph.
RSE Mode – In addition to differential and nonreferenced single-
ended modes, NI full-featured E Series devices offer referenced Worldwide Support and Services
single-ended (RSE) mode for use with floating signal sources in NI provides you with a wealth of resources to help you get your
applications with channel counts higher than eight.
application up and running more quickly, including:
Onboard Temperature Sensor – Included for monitoring the Technical Support – Purchase of NI hardware or software gives you
operating temperature of the device to ensure that it is operating access to application engineers all over the world as well as Web
within the specified range.
resources with more than 3,000 measurement examples and more
than 9,000 KnowledgeBase entries. – ni.com/support
Analog and Digital Triggering – Only full-featured E Series devices
provide the ability to set a trigger based on the level of an analog NI Factory Installation Services (FIS) – Software and hardware
signal, in addition to the ability to trigger off an edge of a installed in PXI and PXI/SCXI systems, tested and ready to
digital signal.
use – ni.com/advisor
More Input Ranges – Up to 15 input ranges for optimal resolution, Calibration – Includes NIST-traceable basic calibration certificates,
even for signals smaller than 50 mV.
services for ANSI/NCSL-Z540 and periodic calibration –
ni.com/calibration
High-Performance, Easy-to-Use Driver Software
NI-DAQ is the robust driver software that makes it easy to access the Extended Warranty
– Meet project life-cycle requirements
functionality of your data acquisition hardware, whether you are a and maintain optimal performance in a cost-effective way –
beginning or advanced user. Helpful features include: ni.com/services
Automatic Code Generation – DAQ Assistant is an interactive guide Data Acquisition Training – Instructor-led courses – ni.com/training
that steps you through configuring, testing, and programming
measurement tasks, and generating the necessary code automatically Professional Services – Feasibility, consulting, and integration
for use in LabVIEW, LabWindows/CVI, or Measurement Studio.
through our Alliance Partners – ni.com/alliance
Cleaner Code Development – Basic and advanced software functions For more information on NI services and support,
have been combined into one easy-to-use yet powerful set to help please visit ni.com/services
you build cleaner code and move from basic to advanced
applications without replacing functions.
For information on device support in
NI-DAQ 7, visit ni.com/dataacquisition
200 National Instruments • Tel: (800) 433-3488 • Fax: (512) 683-9300 • info@ni.com • ni.com
5秒后页面跳转
资料手册解读：UC3842参数和管脚说明
一文带你了解无源晶振的负载电容为何要加两颗谐振电容CL1和CL2
玻璃管保险丝与陶瓷管保险丝：区别与替代性探讨
PCF8574资料解读：主要参数分析、引脚说明
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
