Spindle Position Displays
Hollow shaft max. ø14 mm, with infrared interface
Format alignment by power tool, interface RS485
N 153
Features
– Infrared interface for format alignment by power tool
– Absolute multiturn measuring system
– Display: LCD backlit, two lines
– Actual value and target display
– LED status display
– Interface RS485
– Resolution: 1440 steps/revolution ±4096 revolutions
– Two operating keys for format alignment touch by
touch
N 153 with cable output
Technical data - electrical ratings
Technical data - mechanical design
Voltage supply
Current consumption
Display
24 VDC ±10 %
Hollow shaft
ø14 mm
≤40 mA
Operating speed
≤600 rpm (short-term)
LCD, 7-segment display,
2-lines, backlit
Protection DIN EN 60529 IP 65
Operating temperature
Storing temperature
Relative humidity
Torque support
-10...+50 °C
Measuring principle
Measuring range
Absolute multiturn measuring
system
-20...+70 °C
80 % non-condensing
Torque pin provided at housing
-99.99...+999.99 mm
-9.999...+99.999 inch
E-connection
- Male/female connector M8,
4-pin
- Cable output (30/15 cm) with
male/female connector M8,
4-pin
Steps per turn
Number of turns
Spindle pitch
Interface
1440
4096 / 12 bit
≤14 mm
RS485 (ASCII protocol)
Operation / keypad
Housing type
Dimensions W x H x L
Mounting
Membrane with two keys
Surface-mount with hollow shaft
37 x 75 x 45 mm
Data memory
Parameter buffer: EEPROM
Current value buffer: >10 years
by integrated 3 V lithium battery
Programmable
parameters
Display position horizontal/
vertical
Measuring unit mm/inch
Counting direction
Spindle pitch
Surface-mount with hollow shaft
120 g
Weight approx.
Material
Polyamide black, UL 94V-0
Spindle tolerance
Positioning direction
Direction arrows
Tolerance window
Round up/down
Motive positioning
Two softkeys for format
alignment
Connected to power tool by
infrared interface
Standard
Protection class II
DIN EN 61010-1
Overvoltage category II
Pollution degree 2
Emitted interference
Interference immunity
Approval
DIN EN 61000-6-3
DIN EN 61000-6-2
UL/cUL
www.baumerivo.com
1