MX25L25733F
3V 256M-BIT [x 1/x 2/x 4] CMOS MXSMIO (SERIAL MULTI I/O)
FLASH MEMORY
1. FEATURES
GENERAL
•
•
•
Command Reset
•
Supports Serial Peripheral Interface -- Mode 0 and
Mode 3
Program/Erase Suspend and Resume operation
Electronic Identification
•
Single Power Supply Operation
- 2.7 to 3.6 volt for read, erase, and program
operations
JEDEC 1-byte manufacturer ID and 2-byte device
ID
-
- RES command for 1-byte Device ID
- REMS command for 1-byte manufacturer ID and
1-byte device ID
Support Serial Flash Discoverable Parameters
(SFDP) mode
•
268,435,456 x 1 bit structure
or 134,217,728 x 2 bits (two I/O mode) structure
or 67,108,864 x 4 bits (four I/O mode) structure
Protocol Support
•
•
- Single I/O, Dual I/O and Quad I/O
Latch-up protected to 100mA from -1V to Vcc +1V
Fast read for SPI mode
HARDWARE FEATURES
•
•
•
SCLK Input
- Serial clock input
SI/SIO0
- Support clock frequency up to 133MHz for all
protocols
•
- Serial Data Input or Serial Data Input/Output for 2
x I/O read mode and 4 x I/O read mode
SO/SIO1
- Serial Data Output or Serial Data Input/Output for
2 x I/O read mode and 4 x I/O read mode
WP#/SIO2
- Hardware write protection or Serial Data Input/
Output for 4 x I/O read mode
HOLD#/SIO3
- Hardware HOLD# pin or Serial Data Input/Output
for 4 x I/O read mode
- Support Fast Read, 2READ, DREAD, 4READ,
QREAD instructions.
- Configurable dummy cycle number for fast read
operation
Quad Peripheral Interface (QPI) available
Equal Sectors with 4K byte each, or Equal Blocks
with 32K byte each or Equal Blocks with 64K byte
each
- Any Block can be erased individually
Programming :
•
•
•
•
•
•
•
- 256byte page buffer
- Quad Input/Output page program(4PP) to enhance
program performance
PACKAGE
-16-pin SOP (300mil)
•
•
•
Typical 100,000 erase/program cycles
20 years data retention
4-bytes address interface
- All devices are RoHS Compliant and Halogen-
free
SOFTWARE FEATURES
•
Input Data Format
- 1-byte Command code
•
Advanced Security Features
- Block lock protection
The BP0-BP3 and T/B status bit defines the size of
the area to be protection against program and erase
instructions
- Advanced sector protection function (Solid Protect)
Additional 8K bit security OTP
•
Features unique identifier
Factory locked identifiable, and customer lockable
-
-
Macronix Proprietary
P/N: PM2584
Rev. 1.0, September 09, 2019
4