MVKPL Series
¾ Wide Frequency Range
¾ Complimentary PECL Output
¾ +3.30 VDC or +5.00 VDC Supply
¾ Surface Mount Package
¾ Less than 1pSec Jitter
ELECTRICAL SPECIFICATION:
MARKING:
Frequency Range
20.000 MHz to 250.000 MHz
Frequency Stability (Inclusive of
Temperature, Load, Voltage and Aging
Operating Temperature Range
Storage Temperature Range
Supply Voltage (Vdd)
(See Part Number Guide for Options)
(See Part Number Guide for Options)
-55°C to +125°C
+5.00VDC ±5% or +3.30VDC ±5%
80mA
Line 1: MXX.XXX
XX.XXX = Frequency in MHz
Supply Current
Logic “0”
Logic “1”
Vdd – 1.620 VDC max
Vdd – 1.025 VDC max
45/55% max
Line 2: SYYMML
S = Internal Code
YYMM = Date Code (Year/Month)
L = Denotes RoHS Compliant
Symmetry (50% of waveform)
Load
Rise / Fall Time (20% to 80%)
Jitter RMS (12kHz to 20MHz)
Control Volt Range (Vdd = +3.30VDC)
Control Volt Range (Vdd = +5.00VDC)
50 Ohms into Vdd - +2.00 VDC
2nSec max
Line 3: XXXXX
1pSec max
Internal Manufacture Code
+1.65VDC ±1.50VDC Positive Slope
+2.50VDC ±2.00VDC Positive Slope
Sufficient to compensate for all conditons
for 10 years
Frequency Deviation
Input Impedence
10k Ohms min
MECHANICAL DETAIL:
10.16 [.400]
7.11 [.280]
6.35 [.250]
Pin Connections
Pin 1 Voltage Control
Pin 2 N/C or Tri-state
Pin 3 Case Ground
Pin 4 Output
Pin 5 Complimentary Output
Pin 6 Suppy Voltage (Vdd)
3
2
1
4
5
6
14.73 [.580]
5.08 [.200]
5.08 [.200]
2.54 [.100]
1.02 [.040]
1.27 [.050]
2.54 [.100]
1.52 [.060]
6.10 [.240]
Dimension in Brackets are in Inches
External Bypass Capacitor is Recommended
Recommend Land
Pattern
PART NUMBERING GUIDE:
Frequency
MVK
6 Pad SMD
RoHS Compliant
PL
Pin 2 Connection
Blank = No Connect
H = Tri-state
Value Added Options
Blank = No Added Options
T = Tape and Reel
Please check with factory
for availability of Tape and
Reel
Blank = Not Compliant
F = Is Compliant
Output
PL = PECL
w/Low Jitter
Frequency
Stability
020 = ±20 ppm **
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Supply Voltage
Blank = +5 VDC
3 = +3.3 VDC
Mode of Operation
1 = Fundamental
3 = 3rd Overtone
P = PLL
Operating Temperature
Blank = 0°C to +70°C
48 = -40°C to +85°C
** Available from
0° to +70° only.
Please Consult with MMD sales department for any other parameters or options.
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
Specifications subject to change without notice
Revision 7/11/05 E