MPQ8636
High Efficiency, 4/10/20A, 18V
Synchronous, Step-Down Converter
The Future of Analog IC Technology
Input
Voltage
FEATURES
Part Number
Package
OVP
Wide 4.5V-to-18V Operating Input Range
4A/10A/20A Output Current
Optimal Low RDS(ON) Internal Power
MOSFETs Per Device
Proprietary Switching-Loss–Reduction
Technique
Adaptive COT for Ultrafast Transient
Response
0.5% Reference Voltage Over 0°C to 70°C
Junction Temperature Range
Programmable Soft-Start Time
Pre-Bias Start-Up
Non-
Latch
MPQ8636GLE-4 QFN(3x4mm)
4.5V to 18V
MPQ8636GLE-
QFN(3x4mm)
10
4.5V to 18V
4.5V to 18V
4.5V to 18V
Latch-off
MPQ8636HGLE-
QFN(3x4mm)
10
Non-
Latch
MPQ8636GVE-
QFN(5x4mm)
20
Non-
Latch
DESCRIPTION
The MPQ8636 is a fully-integrated, high-
frequency, synchronous, rectified, step-down,
switch-mode converter. It offers a very compact
solution to achieve 4A/10A/20A output current
over a wide input supply range, with excellent
load and line regulation. The MPQ8636 operates
at high efficiency over a wide output-current–load
range.
Programmable Switching Frequency from
200kHz to 1MHz
Non-Latch OCP, OVP, and Thermal
Shutdown
Output Adjustable from 0.611V to 13V
APPLICATIONS
The MPQ8636 uses Constant-On-Time (COT)
control to provide a fast transient response and
ease loop stabilization.
Telecom and Networking Systems
Base Stations
Servers
Personal Video Recorders
Flat-Panel Televisions and Monitors
Distributed Power Systems
An external resistor programs the operating
frequency from 200kHz to 1MHz, and the
frequency keeps nearly constant as input
supply
varies
with
the
feed-forward
compensation.
All MPS parts are lead-free, halogen free, and adhere to the RoHS
directive. For MPS green status, please visit MPS website under Quality
Assurance.
“MPS” and “The Future of Analog IC Technology” are Registered
Trademarks of Monolithic Power Systems, Inc.
The default under-voltage lockout threshold is
internally set at 4.1V, but a resistor network on
the enable pin can increase this threshold. The
soft-start pin controls the output-voltage startup
ramp. An open-drain power-good signal
indicates that the output is within nominal
voltage range.
It has fully-integrated protection features that
include over-current protection, over-voltage
protection and thermal shutdown.
The MPQ8636 requires a minimal number of
readily-available standard external components
and is available in a 16-Pin QFN 3mm×4mm or a
29-Pin QFN 5mm×4mm package.
MPQ8636 Rev. 1.32
6/7/2017
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2017 MPS. All Rights Reserved.
1