MPQ8636GV/MPQ8636HGV
High Efficiency, 20A, 18V
Synchronous, Step-Down Converter
The Future of Analog IC Technology
DESCRIPTION
FEATURES
The MPQ8636GV-20/MPQ8636HGV-20 is a
fully-integrated, high-frequency, synchronous,
rectified, step-down, switch-mode converter. It
offers a very compact solution to achieve 20A
output current over a wide input supply range,
with excellent load and line regulation. The
MPQ8636GV-20/MPQ8636HGV-20 operates at
high efficiency over a wide output-current–load
range.
•
•
•
•
Wide 4.5V-to-18V Operating Input Range
20A Output Current
Low RDS(ON) Internal Power MOSFETs
Proprietary Switching-Loss–Reduction
Technique
Adaptive COT for Ultrafast Transient
Response
0.5% Reference Voltage Over 0°C to 70°C
Junction Temperature Range
Programmable Soft-Start Time
Pre-Bias Start-Up
•
•
•
•
•
The MPQ8636GV-20/MPQ8636HGV-20 uses
Constant-On-Time (COT) control to provide a
fast transient response and ease loop
stabilization.
Programmable Switching Frequency from
200kHz to 1MHz
•
•
Non-Latch OCP, OVP, and Thermal
Shutdown
Output Adjustable from 0.611V to 13V
An external resistor programs the operating
frequency from 200kHz to 1MHz, and the
frequency keeps nearly constant as input
supply
compensation.
varies
with
the
feed-forward
APPLICATIONS
•
•
•
•
•
•
Telecom and Networking Systems
Base Stations
Servers
Personal Video Recorders
Flat-Panel Televisions and Monitors
Distributed Power Systems
The default under-voltage lockout threshold is
internally set at 4.1V, but a resistor network on
the enable pin can increase this threshold. The
soft-start pin controls the output-voltage startup
ramp. An open-drain power-good signal
indicates that the output is within nominal
voltage range.
All MPS parts are lead-free and adhere to the RoHS directive. For MPS green
status, please visit MPS website under Products, Quality Assurance page.
“MPS” and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
It has fully-integrated protection features that
include over-current protection, over-voltage
protection and thermal shutdown.
The MPQ8636GV-20/MPQ8636HGV-20 requires
a minimal number of readily-available, standard,
external components and is available in a
5mm×4mm 25-Pin QFN package.
TYPICAL APPLICATION
MPQ8636-20 Rev. 1.01
9/25/2014 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
www.MonolithicPower.com
1