MPQ8632D-6, MPQ8632D-12
High Efficiency, 6A/12A, 18V
Synchronous Step-down Converter
The Future of Analog IC Technology
DESCRIPTION
FEATURES
The MPQ8632D-6/MPQ8632D-12 is a fully
integrated high frequency synchronous rectified
step-down switch mode converter. It offers a
very compact solution to achieve 6A/12A output
current over a wide input supply range with
excellent load and line regulation. The
MPQ8632D-6/MPQ8632D-12 operates at high
efficiency over a wide output current load range.
•
2.5V to 18V Operating Input Range with
External 5V Bias
4.5V to 18V Operating Input Range with
Internal Bias
•
•
•
•
6A/12A Output Current
Low RDS(ON) Internal Power MOSFETs
Proprietary Switching Loss Reduction
Technique
•
•
•
Adaptive COT for Ultrafast Transient
Response
0.5% Reference Voltage Over 0°C to 70°C
Junction Temperature Range
Programmable Soft Start and Shut-down
Time
Pre-Bias Start up
Programmable Switching Frequency from
200kHz to 1MHz
The
MPQ8632D-6/MPQ8632D-12
uses
Constant-On-Time (COT) control mode to
provide fast transient response and ease loop
stabilization.
An external resistor programs the operating
frequency from 200kHz to 1MHz and the
frequency keeps nearly constant as input
supply
compensation.
•
•
varies
with
the
feedforward
•
•
Non-latch OCP, OVP and Thermal
Shutdown
Output Adjustable from 0.611V to 13V
The default under voltage lockout threshold is
internally set at 4.1V, but a resistor network on
the enable pin can increase this threshold. An
open drain power good signal indicates that the
output is within nominal voltage range.
APPLICATIONS
•
•
•
•
•
•
Telecom and Networking Systems
Base Stations
Servers
Personal Video Recorders
Flat Panel Television and Monitors
Distributed Power Systems
The MPQ8632D-6/MPQ8632D-12 employs a
programmable soft start and shut-down scheme.
With the soft shut-down feature, it discharges
the output voltage smoothly when the enable
signal is deserted.
It has fully integrated protection features that
include over-current protection, over-voltage
protection and thermal shutdown.
All MPS parts are lead-free and adhere to the RoHS directive. For MPS green
status, please visit MPS website under Products, Quality Assurance page.
“MPS” and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
The MPQ8632D-6/MPQ8632D-12 requires a
minimal number of readily available standard
external components and is available in a
3mm×4mm package.
MPQ8632D-6_MPQ8632D-12 Rev. 1.01
3/9/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
www.MonolithicPower.com
1