MPQ8633B-H
16V, 20A, Configurable-Frequency,
Synchronous Step-Down Converter with
Adjustable Current Limit and Voltage Tracking
DESCRIPTION
FEATURES
The MPQ8633B-H is a fully integrated, high-
frequency, synchronous step-down converter. It
offers a compact solution that can achieve up to
20A of output current (IOUT) across a wide input
voltage (VIN) range, with excellent load and line
regulation. The MPQ8633B-H operates at high
efficiency across the entire IOUT load range.
•
Wide Input Voltage (VIN) Range
o 2.7V to 16V VIN Range with External
3.3V VCC Bias
o 4V to 16V VIN Range with Internal Bias
or External 3.3V VCC Bias
Differential VOUT Remote Sense
Configurable Accurate Current Limit
•
•
•
•
•
20A Output Current (IOUT
)
Internally compensated constant-on-time (COT)
control provides fast transient response and
eases loop stabilization.
Low RDS(ON) Integrated Power MOSFETs
Proprietary Switching Loss Reduction
Technique
Adaptive Constant-On-Time (COT) Control
for Fast Transient Response
Stable with Zero ESR Output Capacitor
0.5% VREF for 0°C to 70°C TJ Range
1% VREF for -40°C to +125°C TJ Range
Selectable Pulse Skip Mode (PSM)/Forced
Continuous Conduction Mode (FCCM)
Excellent Load Regulation
VOUT Tracking
PGOOD Active Clamped Low during Power
Failure
Configurable Soft-Start Time (tSS) from 1ms
Pre-Bias Start-Up
600kHz, 800kHz, or 1000kHz Selectable fSW
Non-Latch OCP, OVP, UVP, UVLO, and
Thermal Shutdown
The adjustable switching frequency (fSW) can be
set to 600kHz, 800kHz, or 1000kHz by
configuring the MODE pin. This maintains a
constant fSW, regardless of the output voltage
(VOUT) or VIN.
•
•
•
•
•
The VOUT start-up ramp is controlled via an
internal timer (1ms). For a longer internal timer,
add a capacitor to the TRK/REF pin. An open-
drain power good (PGOOD) signal indicates
whether VOUT is within its nominal voltage range.
If the input supply fails to power the
MPQ8633B-H, then PGOOD is clamped at
about 0.7V via an external pull-up voltage.
•
•
•
•
•
•
•
Full protection features include over-current
protection (OCP), over-voltage protection
(OVP), under-voltage protection (UVP), and
thermal shutdown.
•
•
Adjustable Output between 0.6V and 90%
of VIN, with 5.5V Maximum
Available in a QFN-21 (3mmx4mm)
Package
The MPQ8633B-H requires a minimal number
of readily available, standard external
components, and is available in a QFN-21
(3mmx4mm) package.
APPLICATIONS
•
•
•
•
•
•
•
Telecommunication/Networking Systems
Servers, Cloud-Computing, and Storage
Base Stations
General-Purpose POL Systems
12V Distribution Power Systems
High-End Televisions
Game Consoles and Graphic Cards
All MPS parts are lead-free, halogen-free, and adhere to the RoHS
directive. For MPS green status, please visit the MPS website under
Quality Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
MPQ8633B-H Rev. 1.0
2/25/2022 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2022 MPS. All Rights Reserved.
MonolithicPower.com
1