MPQ4569―75V, 0.3A, SYNCHRONOUS STEP-DOWN CONVERTER
PIN FUNCTIONS
Pin #
QFN-10
(3mmx3mm)
Pin #
SOIC-8
EP
Name
Description
Ground. Connected the output capacitor as close as possible to avoid
high-current switch paths.
1
2
1
2
GND
IN
Input Supply. Requires a decoupling capacitor to ground to reduce
switching spikes.
Enable Input. Pull this pin below the low threshold to shut the chip down.
Pull it above the high threshold enables the chip. Float this pin to shut the
chip down.
3
4
3
EN
VREF
FB
No
Bonding
Reference Voltage Output, for QFN-10 (3mmx3mm) package only.
Feedback Connected to the tap of an external resistive divider between
the output and GND. Sets the regulation voltage when compared to the
internal 1V reference.
5
4
5
Soft-Start Control Input. Connect a capacitor from SS to GND to set the
soft-start period.
6
SS
Open Drain Power Good Output. “HIGH” output indicates VOUT is higher
than 90% of reference. POK is pulled down in shutdown, for QFN-10
(3mmx3mm) package only
No
Bonding
7
POK
BIAS
BST
SW
Controller Bias Input. Supplies current to the internal circuit when
VBIAS>2.9V.
8
6
7
8
Bootstrap. Positive power supply for the internal floating high-side
MOSFET driver. Connect a bypass capacitor between this pin and SW
pin.
9
10
Switch Node.
MPQ4569 Rev. 1.02
5/25/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
5