MPQ4316A
45V, 6A, Low-IQ, Synchronous Step-Down
Converter with Frequency Spread Spectrum,
AEC-Q100 Qualified
DESCRIPTION
FEATURES
The MPQ4316A is a configurable-frequency,
synchronous, step-down switching converter
with an integrated, internal high-side MOSFET
(HS-FET) and low-side MOSFET (LS-FET). The
device provides up to 6A of highly efficient output
current (IOUT) with current mode control for fast
loop response.
•
Designed for Automotive Applications:
o Wide 3.3V to 45V Operating Input
Voltage (VIN) Range
o 6A Continuous Output Current (IOUT
)
o 100ns Minimum On Time (tON_MIN
)
o Junction Temperature (TJ) Operation
from -40°C to +150°C
•
Increases Battery Life:
The wide 3.3V to 45V input voltage (VIN) range
o 1.7μA Low Shutdown Supply Current
o 18μA Sleep Mode Quiescent Current
o AAM Mode Increases Efficiency under
Light Loads
High Performance for Improved Thermals:
o Internal 48mΩ HS-FET and 20mΩ
LS-FET
Optimized for EMC and EMI:
o 350kHz to 1000kHz Configurable fSW for
Car Battery Applications
o Synchronize to External Clock
o Out-of-Phase Synchronized Clock
Output
accommodates
a
variety of step-down
applications in automotive input environments. A
low 1.7μA quiescent current (IQ) in shutdown
mode allows the device to be used in battery-
powered applications.
•
•
High power conversion efficiency across a wide
load range is achieved by scaling down the
switching frequency (fSW) under light-load
conditions to reduce switching and gate driver
losses.
An open-drain power good (PG) signal indicates
whether the output is within 95% to 105% of its
nominal voltage.
o FSS Modulation
o Symmetric VIN Pinout
Frequency foldback helps prevent inductor
current runaway during start-up. Thermal
shutdown provides reliable, fault-tolerant
operation.
o CISPR25 Class 5 Compliant
o MeshConnectTM Flip-Chip Package
Additional Features:
o Power Good (PG) Output
o External Soft Start (SS)
o Selectable AAM Mode or FCCM
o Low-Dropout Mode
o Hiccup Over-Current Protection (OCP)
o Available in a QFN-20 (4mmx4mm)
Package with Wettable Flanks
o Available in AEC-Q100 Grade 1
•
A high duty cycle and low-dropout mode are
provided for automotive cold-crank conditions.
The MPQ4316A is available in a QFN-20
(4mmx4mm) package, and is AEC-Q100
qualified.
APPLICATIONS
•
•
•
Automotive Infotainment
Automotive Clusters
Advanced Driver Assistance Systems
(ADAS)
•
Industrial Power Systems
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality Assurance.
“MPS”, the MPS logo, and “Simple, Easy Solutions” are trademarks of
Monolithic Power Systems, Inc. or its subsidiaries.
MPQ4316A Rev. 1.0
6/17/2022
MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2022 MPS. All Rights Reserved.
1