MPQ4316
45V, 6A, Low IQ, Synchronous Step-Down
Converter with Frequency Spread Spectrum,
AEC-Q100 Qualified
DESCRIPTION
FEATURES
The MPQ4316 is a frequency-configurable,
synchronous, step-down switching converter
with integrated internal high-side and low-side
power MOSFETs. The device provides 6A (or
less) of highly efficient output current with current
mode control for fast loop response.
Wide 3.3V to 45V Operating Voltage Range
6A of Continuous Output Current
1.7μA Low Shutdown Supply Current
18μA Sleep Mode Quiescent Current
Internal 48mΩ High-Side MOSFET and
20mΩ Low-Side MOSFET
350kHz to 1000kHz Configurable Switching
Frequency for Car Battery Applications
Can Be Synchronized to External Clock
Out-of-Phase Synchronized Clock Output
Fixed Output Options: 3.3V, 5V
Frequency Spread Spectrum (FSS) for Low
EMI
Symmetric VIN for Low EMI
Power Good Output
External Soft Start
100ns Minimum On Time
The wide 3.3V to 45V input range
accommodates
a
variety of step-down
applications in automotive input environments. A
1.7μA shutdown mode quiescent current allows
the device to be used in battery-powered
applications.
The device achieves high power conversion
efficiency across the wide load range by scaling
down the switching frequency under light-load
conditions to reduce the switching and gate
driving losses.
Selectable Advanced Asynchronous Mode
(AAM) or Forced Continuous Conduction
Mode (FCCM)
An open drain power good signal indicates when
the output is within 95% to 105% of its nominal
voltage.
Low-Dropout Mode
Frequency foldback helps prevent inductor
current runaway during start-up. Thermal
shutdown provides reliable, fault-tolerant
operation.
Hiccup Over-Current Protection (OCP)
Available in a QFN-20 (4mmx4mm)
Package
Available in a Wettable Flank Package
Available in AEC-Q100 Grade 1
The device provides a high duty cycle and low-
dropout mode for automotive cold-crank
conditions.
APPLICATIONS
Automotive Infotainment
Automotive Clusters
Advanced Driver Assistance Systems
Industrial Power Systems
The MPQ4316 is available in a QFN-20
(4mmx4mm) package.
MPQ4316 FAMILY VERSIONS
Part
Number
Output
Current
2A
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality Assurance.
“MPS”, the MPS logo, and “Simple, Easy Solutions” are trademarks of
Monolithic Power Systems, Inc. or its subsidiaries.
Package Options
MPQ4312
MPQ4313
MPQ4314
MPQ4315
MPQ4316
MPQ4317
3A
4A
5A
6A
QFN-20 (4mmx4mm)
WF (1)
7A
Note:
1) WF means wettable flank.
MPQ4316 Rev. 1.0
4/30/2021
MonolithicPower.com
1
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2021 MPS. All Rights Reserved.