MPQ2483A
Industrial/Automotive-Grade
55V, 2.5A Programmable
Frequency LED Driver
Available in AEC-Q100
The Future of Analog IC Technology
DESCRIPTION
FEATURES
The MPQ2483A is a 55V LED driver suitable for
either step-down or inverting step-up and step-
down applications. It achieves a 2.5A peak
current with excellent load and line regulation
over a wide input supply range.
2.5A Maximum Peak Current
Buck or Buck-Boost Modes
Wide 4.5V to 55V Operating Input Range
0.28Ω Internal Power MOSFET Switch
Analog and PWM Dimming
0.198V Reference Voltage
5μA Shutdown Mode
Stable with Low ESR Capacitors
Cycle-by-Cycle Over-Current Protection
(OCP)
The MPQ2483A incorporates both DC and
PWM dimming into a single control pin. The
separate input reference ground allows for
direct enable and dimming control for positive-
to-negative power conversion.
Thermal Shutdown, Over-Voltage (OVP),
Short–Circuit (SCP), and Open-String
Protection
Current-mode operation provides fast transient
response and eases loop stabilization. Full
protection features include cycle-by-cycle peak
current limiting, output over-voltage protection
(OVP), open-string protection, output short-circuit
protection (SCP), and thermal shutdown.
AEC-Q100 Qualified
APPLICATIONS
General LED Illumination
LCD Backlight Panels
Automotive Lighting
The MPQ2483A requires a minimal number of
readily available, standard, external components
and is available in 10-pin QFN (3mmx3mm) and
14-pin SOIC14 packages.
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive. For
MPS green status, please visit the MPS website under Quality Assurance.
“MPS” and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
MPQ2483A Rev. 1.01
8/15/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
1