MPQ2483
Industrial/Automotive-Grade
55V, 2.5A Programmable
Frequency LED Driver
Avaiable in AEC-Q100
The Future of Analog IC Technology
DESCRIPTION
FEATURES
The MPQ2483 is a 55V, LED driver suitable for
either step-down or inverting step-up/down
applications. It achieves 2.5A peak current over
a wide input supply range with excellent load
and line regulation. Current mode operation
provides fast transient response and eases loop
stabilization. Fault condition protection includes
thermal shutdown, cycle-by-cycle peak current
limiting, output over voltage protection, open
strings protection and output short circuit
protection.
•
•
•
•
•
•
•
•
•
•
2.5A Maximum Peak Current
Buck or Buck-Boost Modes
Wide 4.5V to 55V Operating Input Range
0.28Ω Internal Power MOSFET Switch
Analog and PWM Dimming
0.198V Reference Voltage
5μA Shutdown Mode
Stable with Low ESR Capacitors
Cycle-by-Cycle Over Current Protection
Thermal Shutdown, Over Voltage, Short
Circuit & Open String Protection
AEC-Q100 Qualified
The MPQ2483 incorporates both DC and PWM
dimming onto a single control pin. The separate
input reference ground pin allows for direct
enable and/or dimming control for a positive to
negative power conversion.
•
APPLICATIONS
•
•
•
General LED Illumination
LCD Backlight Panels
Automotive Lighting
The MPQ2483 requires a minimum number of
readily available standard external components
and is available in a 10-pin 3mm x 3mm QFN and
SOIC 14-pin packages.
All MPS parts are lead-free, halogen free, and adhere to the RoHS
directive. For MPS green status, please visit MPS website under Quality
Assurance.
“MPS” and “The Future of Analog IC Technology” are Registered
Trademarks of Monolithic Power Systems, Inc.
TYPICAL APPLICATION
MPQ2483 Rev. 1.05
8/18/2015
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2015 MPS. All Rights Reserved.
1