MP8775 – 23V, SYNCHRONOUS STEP-DOWN CONVERTER WITH INTERNAL MOSFETS
ORDERING INFORMATION
Part Number
MP8775EL*
MP8775EN**
Package
3x4 QFN14
SOIC8E
Top Marking
8775
MP8775EN
Free Air Temperature (TA)
-20°C to +85°C
-20°C to +85°C
* For Tape & Reel, add suffix –Z (e.g. MP8775EL–Z);
For RoHS compliant packaging, add suffix –LF; (e.g. MP8775EL–LF–Z)
** For Tape & Reel, add suffix –Z (e.g. MP8775EN–Z);
For RoHS compliant packaging, add suffix –LF; (e.g. MP8775EN–LF–Z)
PACKAGE REFERENCE
TOP VIEW
IN
SW
SW
SW
SW
BST
EN
1
2
3
4
5
6
7
14 AGND
TOP VIEW
13 GND
VIN
SW
BST
EN
1
2
3
4
8
7
6
5
GND
VCC
AAM
FB
12 GND
11 VCC
AAM
PG
10
9
EXPOSED PAD
ON BACKSIDE
FB
8
EXPOSED PAD
ON BACKSIDE
3x4 QFN14
SOIC8E
Thermal Resistance (4)
3x4 QFN14.............................48......11.....°C/W
SOIC8 (Exposed Pad) ............50......10 ....°C/W
θJA θJC
ABSOLUTE MAXIMUM RATINGS (1)
Supply Voltage VIN .......................................25V
VSW ..........................-0.3V (-5V for 10ns) to 25V
VBS ..................................................... VSW + 6V
All Other Pins................................. -0.3V to +6V
Continuous Power Dissipation
…………………………………………………2.6W
Junction Temperature..............................150°C
Lead Temperature ...................................260°C
Storage Temperature...............-65°C to +150°C
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
(TA = +25°C) (2)
maximum junction temperature TJ
ambient thermal resistance θJA, and the ambient temperature
TA. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by PD (MAX) = (TJ (MAX)
TA) /θJA. Exceeding the maximum allowable power dissipation
will cause excessive die temperature, and the regulator will
go into thermal shutdown. Internal thermal shutdown circuitry
protects the device from permanent damage.
, the junction-to-
(MAX)
-
Recommended Operating Conditions (3)
Supply Voltage VIN .......................... 4.5V to 23V
Operating Junct. Temp (TJ)......-20°C to +125°C
3) The device is not guaranteed to function outside of its
operating conditions.
4) Measured on JESD51-7, 4-layer PCB.
MP8775 Rev. 0.94
12/10/2013
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2013 MPS. All Rights Reserved.
2