MP5470 – 12V DIGITAL PMIC WITH I2C AND MTP
PACKAGE REFERENCE
TOP VIEW
FB1 SGND1 GPIO
22
21
20
AGND FB4 NC
19 18 17
VIN1
SW1
16 VCC
15 SW4
1
2
GND
14 GND
13 SW3
3
SW2
VIN2
4
5
EN/
12
SYNCI
6
7
8
9
10
11
FB2 SCL SDA
SGND2 FB3 NC
QFN-22 (3mmx4mm)
PIN FUNCTIONS
Package
Pin #
Name
Description
Supply voltage input of buck 1 and buck 4. The MP5470 operates from a 4V to
16V input rail. Use a ceramic capacitor to decouple the input rail. Connect VIN1 using
a wide PCB trace. VIN1 and VIN2 should be connected together.
1
VIN1
2
3, 14
4
SW1
GND
SW2
Buck1 switch output. Connect SW1 using a wide PCB trace.
Power ground. GND requires special consideration during the PCB layout. Connect
GND with copper traces and vias.
Buck 2 switch output. Connect SW2 using a wide PCB trace.
Supply voltage input of buck 2 and buck 3. The MP5470 operates from a 4V to
16V input rail. Use a ceramic capacitor to decouple the input rail. Connect VIN2 using
a wide PCB trace. VIN1 and VIN2 should be connected together.
5
VIN2
Feedback of buck 2. Connect buck 2’s output to FB2 directly or through a feedback
resistor divider.
6
FB2
7
8
SCL
SDA
I2C clock signal input.
I2C data.
Remote sense ground of buck 3 and buck 4. Kelvin-connect SGND2 to buck 3 and
buck 4's output capacitor's ground node.
9
SGND2
Feedback of buck 3. Connect buck 3’s output to FB3 directly or through a feedback
resistor divider.
10
FB3
NC
11, 17
No connection.
Enable control pin. Pull EN/SYNCI to logic high to enable the MP5470. Pull
EN/SYNCI to logic low to disable the MP5470. EN has a 2MΩ internal pull-down
resistor. Apply a clock on EN/SYNCI to synchronize the switching frequency to the
external clock.
12
EN/SYNCI
MP5470 Rev. 1.0
2/28/2019
www.MonolithicPower.com
MPS 专有信息。受专利保护。未经授权,请勿影印及复制。
© 2019 MPS. 版权所有。
4