MP2615B
2A, 1 Cell Li-ion Battery Charger
In 3mm x 3mm Package
The Future of Analog IC Technology
DESCRIPTION
FEATURES
The MP2615B is a monolithic switching charger
for a 1 cell lithium-Ion or lithium-Polymer battery
packed with built-in power MOSFETs. It’s able
to achieve up to 2A charge current which can
be programmed via an accurate sense resistor
over the whole input range.
•
•
•
•
•
4.5V to 18V Operating Input Voltage
Up to 99% Duty Cycle Operation
Up to 2A Programmable Charging Current
±0.75% Full Battery Voltage Accuracy
4.03V and 3.99V Selection for Full Battery
Voltage
•
•
•
Full Integrated Power Switches
Internal Loop Compensation
No External Reverse Blocking Diode
Required
MP2615B regulates the charge current and full
battery voltage using two control loops to
realize high accuracy constant current (CC)
charge and constant voltage (CV) charge.
•
•
•
•
•
•
Preconditioning for Fully Depleted Battery
Charging Operation Indicator
Programmable Safety Timer
Thermal Shutdown Protection
Cycle-by-Cycle Over Current Protection
Battery Temperature Monitor and Protection
Thanks to the constant-off-time (COT) mode
control, 99% duty cycle can be achieved when
battery voltage is close to the input voltage to
keep the charge current always at a relative
high level.
Battery temperature and charging status are
always monitored for each condition. Two
status monitor output pins are provided to
indicate the battery charging status and input
power status. The MP2615B also features
internal reverse blocking protection.
APPLICATIONS
•
•
•
Smart Phones
Portable Hand-held Solutions
Portable Media Players
All MPS parts are lead-free and adhere to the RoHS directive. For MPS green
status, please visit MPS website under Products, Quality Assurance page.
The MP2615B is available in QFN-16
(3mmx3mm) package.
“MPS” and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
ADAM (Analog Digital Adaptive Modulation) and AAM (Advanced Asynchronous
Mode) are trademarks of Monolithic Power Systems, Inc.
TYPICAL APPLICATION
L
RS1
5V/ 9V Input
90
SW
VIN
R2
R1
C7
BST
CHGOK
85
ACOK MP2615B CSP
Battery
C2
VREF
BATT
TMR
SEL
80
RNTC
R3
NTC
EN
75
ON
OFF
CTMR
AGND
CELL
PGND
70
0
0.5
1
1.5
2
2.5
MP2615B Rev. 1.0
3/17/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
1